|
Title: DQ250 clutch torque issue Post by: ship on January 22, 2021, 11:47:54 PM Hi
My clutch torque cannot be greater than 500nm, once it exceeds, it will reduce the fuel injection Did I miss other limiters? Title: Re: DQ250 clutch torque issue Post by: reycket on January 24, 2021, 02:49:39 PM hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2
Title: Re: DQ250 clutch torque issue Post by: ship on January 25, 2021, 12:32:04 AM hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2 Hello, How to increase the pressure of k1 and k2? Title: Re: DQ250 clutch torque issue Post by: reycket on January 26, 2021, 02:34:32 PM in your dsg stage 2 program, set the map and single values at 15 bar and the map and single mA
Title: Re: DQ250 clutch torque issue Post by: reycket on January 26, 2021, 02:39:10 PM what is your engine configuration? stage 3? engine parts?
Title: Re: DQ250 clutch torque issue Post by: ship on January 27, 2021, 07:24:31 AM in your dsg stage 2 program, set the map and single values at 15 bar and the map and single mA Hi, Which map? (Attach mappack)Title: Re: DQ250 clutch torque issue Post by: ship on January 27, 2021, 07:29:31 AM what is your engine configuration? stage 3? engine parts? Hi, My engine is DFLA(ea288), big turbo, dpf off, 190p injectorTitle: Re: DQ250 clutch torque issue Post by: chora on April 06, 2021, 03:02:45 PM hello
do you have original file? Title: Re: DQ250 clutch torque issue Post by: ship on April 09, 2021, 06:42:59 AM Title: Re: DQ250 clutch torque issue Post by: KRACER on July 06, 2021, 04:28:27 PM I had the same problem，I set the MDNORM to 500NM and the gearbox will limit the power at 4000 -7000RPM。
|