|
Title: Need your help :) Post by: snickers228 on January 26, 2021, 09:48:50 AM Hello guys, so i have audi 1.8t b6 auto trans,
after researches my changes are KWNEGM 6800 KFZWOP 1/2 sub 20 three rows KFZW 1/2 also sub 20 three rows KFZWMN -20 three rows KFTVSAKAT 4480,00 KFTSVA 2,5500 cwsawe 1( just tried to set it know it's for manual) so the problem is that i get good pops and bangs when on place in neutral but I don't get any bangs when moving just a little bit burbles in exhaust slighlty noticable, what did I do wrong? or did I miss anything? Title: Re: Need your help :) Post by: Auriaka on January 26, 2021, 12:03:42 PM On mk4 chassis vehicles I have had luck with kicking Lamfa up at low % in the rpm range I want cracks and pops... I do know there is a Lamfa axis differance between b5/mk4 and b6 chassis though. It could be something to investigate and try however.
Title: Re: Need your help :) Post by: snickers228 on January 26, 2021, 12:13:57 PM On mk4 chassis vehicles I have had luck with kicking Lamfa up at low % in the rpm range I want cracks and pops... I do know there is a Lamfa axis differance between b5/mk4 and b6 chassis though. It could be something to investigate and try however. hmm.. interesting, i'll try |