|
Title: EDC17C64 DTC OFF Post by: ship on January 31, 2021, 06:27:32 AM hello,
please help with remove DTC p0088 SHARAN EDC17C64 thanks in advance Title: Re: EDC17C64 DTC OFF Post by: yxx499 on January 31, 2021, 12:44:13 PM Why would you do that?
As you probably know , this DTC is active because you missed one limiter/s or your rail pressure is way higher than setpoint. Btw, here it is your file. Good luck Title: Re: EDC17C64 DTC OFF Post by: gremlin on January 31, 2021, 05:54:31 PM Btw, here it is your file. Good luck Do not disgrace yourself and remove this file. In this way, on EDC17.x, errors are not turned off, but only masked from the diagnostic equipment. But even so, the error masks are defined incorrectly and partly simply missed, and vice versa, others are affected. Title: Re: EDC17C64 DTC OFF Post by: jurebv on February 02, 2021, 11:55:46 PM 28774B 8bit 1583x1 "DFES / Error Class"
295296 16bit 1583x1 "DFC / Off mask" 29E310 16bit 1583x1 "obd pcode" 2A2AD4 16bit 1583x1 "manufacturer specific code" Title: Re: EDC17C64 DTC OFF Post by: jurebv on February 02, 2021, 11:57:58 PM find code your looking for in "obd pcode" or "manufacturer code" maps (in hex) and remove in in first 2 maps on same number in map
Title: Re: EDC17C64 DTC OFF Post by: prj on February 03, 2021, 03:08:03 AM find code your looking for in "obd pcode" or "manufacturer code" maps (in hex) and remove in in first 2 maps on same number in map There is absolutely zero reason to change error class if disable mask is removed.The diagnostics never run and the error is never set. |