|
Title: 032TL KFTARX address help Post by: vvt18 on February 06, 2021, 10:56:22 AM Hi all. Somebody know 032TL KFTARX address
I have too option but both looks strange 1 at 1EF5C with 10columns for IAT 2 at 1F180 with normal 8 colums for IAT Second one look much normal than first but it is defined for 032TR file. Thanks in advance Title: Re: 032TL KFTARX address help Post by: Leonhard on February 07, 2021, 02:09:20 AM 06A906032TL 0040 378104
KFTARX 10x12 factor 16bit -> 1F180 nMot 16bit -> 13020 IAT 8bit -> 199CC KFTARXB 10x12 factor 16bit -> 1F270 nMot 16bit -> 13020 IAT 8bit -> 199CC Title: Re: 032TL KFTARX address help Post by: vvt18 on February 07, 2021, 06:13:47 AM Thanks LEONHARD, but doesn't looks good
Iat is begin from -40 and in all other files 018n, 032hs begin from -9 , i think it must be defined IAT from 199CD Maps values look bad. LEONHARD can you attach picture with your maps and please if you have location for CWKVHR (auxiliary water pump activation) and if you know the address for crususe control activation? Thanks Title: Re: 032TL KFTARX address help Post by: Leonhard on February 07, 2021, 09:50:53 AM Yes you are right, IAT starts at 199CD
CWKVHR (Codewort für Komponenten-Versorgungsspannung über Hauptrelais) 16bit -> 1BDB6 do you have the "Id" for cruise control activation you looking for? Title: Re: 032TL KFTARX address help Post by: vvt18 on February 07, 2021, 10:25:45 AM Thanks LEONARD!
I have the cruise control active on my 032tl file but i want to make a swap to 032HS where cruise control (get an error signal intermitent) and auziliary water pump not work . For crusie i made Codewort für GRA-Bedienhebel - CWGRABH = 1 and CWFGRGA_0_A =195 and CWFGRGA_1_A = 131 , CW_CAN_R_0___A (0,1,2,3) and CW_CAN_S_0___A (0,1,2,3). For water pump i tried to CWKVHR with 128 and 1 , not work too, but in FR find CWHVHR not CWKVHR, do you have it in your definition? Do you have any suggestions, please? Title: Re: 032TL KFTARX address help Post by: Leonhard on February 07, 2021, 11:26:23 AM CWKVHR
Bit 0 x Bit 1 x Bit 2 x Bit 3 x Bit 4 x Bit 5 x Bit 6 Ansteuerung Luefter 1 bei HR-Pruefung im Nachlauf Bit 7 Ansteuerung Luefter 2 bei HR-Pruefung im Nachlauf Bit 8 Ansteuerung elektr. Zusatzwasserpumpe bei HR-Pruefung im Nachlauf Bit 9 Ansteuerung ETR bei HR-Pruefung im Nachlauf Bit 10 x Bit 11 x Bit 12 Ansteuerung elektr. Zusatzluefter im Nachlauf bei HR-Pruefung I think it doesn't matter or isn't related to your fault, in 032TL it's set to 0 I don't have this address, but if someone can find it, check this one too CWDEZWO Bit 0 Ausblendung der Umschaltung Temperatureingang tka auf Ersatzwert tmotkmtr Bit 1 Umschaltung der Berechnung qklima zwischen takols und Schaltereingaengen Bit 2 Nachlauf Zusatzwasserpumpe gewuenscht Bit 3 NT-Pumpennachlauf gewuenscht Bit 4 Nachlauf Zusatz-Elektroluefter gewuenscht Bit 5 Ausblendung Fehler TKA fuer Umschaltung auf Ersatzwert Bit 6 Ausgang tvlues1 schaltet ein Relais (Funktionsumschaltung in %TKSTA3.>160 und %TKMWL22.>370) Bit 7 Ausgang tvlues2 schaltet ein Relais (Funktionsumschaltung in %TKSTA3.>160 und %TKMWL22.>370) sorry, that's all I got, I'm passing on Title: Re: 032TL KFTARX address help Post by: vvt18 on February 07, 2021, 11:31:08 AM Thanks LEONHARD.
Do you have address for CWKVHR? |