|
Title: unsatisfactory pop and bangs effect Post by: MKmajster on March 07, 2021, 12:30:22 PM hi, I managed to get the pop and bangs in my ecu 4z7907551N tiptronic, unfortunately the effect is unsatisfactory, it will help someone process the file so that the car shoots more when descending from the RPM, I share my map with a weak effect
Title: Re: unsatisfactory pop and bangs effect Post by: prometey1982 on March 08, 2021, 12:58:34 AM Привет. Пиши уж по-русски тогда))
Title: Re: unsatisfactory pop and bangs effect Post by: MKmajster on March 08, 2021, 04:14:57 AM Привет. Пиши уж по-русски тогда)) привет, мне удалось получить треск и треск в моем ecu 4z7907551N tiptronic, к сожалению эффект неудовлетворительный, это поможет кому-то обработать файл, чтобы машина стреляла больше при спуске с RPM, я делюсь своей картой со слабым эффектомTitle: Re: unsatisfactory pop and bangs effect Post by: unicornux on March 08, 2021, 04:49:00 AM With what change is pop & bang created? ???
Title: Re: unsatisfactory pop and bangs effect Post by: MKmajster on March 08, 2021, 04:57:53 AM KFZWOP, KFZWOP2 , KFZW, KFZW2
Title: Re: unsatisfactory pop and bangs effect Post by: Tomas on March 08, 2021, 07:52:12 AM There is no need to modify KFZW or KFZW2.
This is what I do: KFTVSA --> 2.5s where I want, modify the lowest load line of KFZWOP1&2 -22degrees, KFZWMN -31, KFZWMS -96 from 4000rpm to 6000. You will get nice pops and bangs on overrun. Title: Re: unsatisfactory pop and bangs effect Post by: MKmajster on March 08, 2021, 08:23:02 AM can I ask you to match the values according to you? I don't want to go astray anymore, of course if it's not a problem I attach the original bin
Title: Re: unsatisfactory pop and bangs effect Post by: prj on March 08, 2021, 11:32:27 AM This is a DIY forum, not a tune my file forum.
If you can't handle the very clear instructions given to you, then pay someone to do it. Title: Re: unsatisfactory pop and bangs effect Post by: MKmajster on March 09, 2021, 01:48:22 AM There is no need to modify KFZW or KFZW2. This is what I do: KFTVSA --> 2.5s where I want, modify the lowest load line of KFZWOP1&2 -22degrees, KFZWMN -31, KFZWMS -96 from 4000rpm to 6000. You will get nice pops and bangs on overrun. I was able to convert the bin today, the effect is much better, you have a plus from me ;D |