NefMoto

can some one help me find out what the speed limit is called in this damos   i dont know what it is exactly called any help would be great 

...........................................

Just open funktiosnrahme english version and use pdf search...

i dont see anything listed in the m3.8.2 damos called funktiosnrahme  are you sure aeb have that in there damos?

it's a PDF file... search this forum ;)

I don't think there's a funktionsrahmen for a 5.9.2.  :(

The ME7 funktionsrahmen is still helpful.

Yes, the ME7 docs while obviously not 100% match are still very useful. You should be searching for vmax in the file, but you may fine a few ;)

vmax/vavmax/vavmx isn't in the 3.8.2 (euro? clemens damos file). - Maybe because the Euro 1.8t doesn't have a speed limiter?

xxx8indxxx - In the meantime you could cut the the speedo wire to the ECU. This removes the speed limiter since ECU won't know what speed your running. But you'll get a CEL for the speed sensor. Not sure if you'll go limp mode if your using the stock n75(boost cut), I use an EBC.

im slowly matching up the maps for the m3.8 to the m5.9.2 not perfect matches but i have found the  maps for readiness and of course to turn off o2 diagnosis  i really want to learn how to make a damos for m5.9.2   557p ecu

my n75 is plugged in but not hooked up  i am running a t3/t4 on a 99.5 jetta 2.0 8v 8lb boost and volvo 30lb injectors no cats 2.5 exhaust and i am also using a fmu for aditional fuel  i made a custom intake manifold  i am using aeb engine management to run it since my aeg ecu couldnt fuel it right

@ xxx8indxxx :

It would be nice if you have the accompanying .hex of this damos. It is nescessary to import the damos correctly
into winols. I peeked inside the damos and following interesting info was in :

/EPR,[EAMPRO.M3.82.05.400700],,DAMPAR_03
/EAD,$FFFF
/EPK,{53/1/M3.82/05/400700/DAMOS30N/30N01/30N010101/110497/}
PGM-Stand vom: 11-APR-1997 10:27
/PNR,{400700}
/KNR,{05}
/PRO,{R4 5VT 1.8l,04,0,0/5,2,07/97}
/YNR,{4B0 907 557 B}
/BEA,{Brecht}
/DST,{30N010101},{11-APR-97},{11.04.97/Bt/30M010101/Basisstand}


So this is a  descriptorfile of a 4B0907557B (0261204806) audi A6, presumably software D01 version.

If someone has this as a dump, do post it. I wasn't able to find it on the net, sadly.

Thanks,

PvL

I am going to keep messing with this damos I want to translate it bad  im not to good with german

The format of this file looks significantly different to the RS6 file i coded my tool for, else I'd try and help...

its all good thanks for taking a look at it anyways