|
Title: 030906032CE IMMO OFF? Post by: blacktux on March 11, 2021, 10:42:39 AM Hello,
I need to swap the ECU from an Polo 6n2 with AUC engine. I get a used one and try to read the EEPROM 95040 with "M7EEPROM.exe" and my TL866II+ with a clamp. If I compare the dump with the image from this post, I think I'm wrong: https://www.digital-kaos.co.uk/forums/showthread.php/857439-Help-with-IMMO-OFF-VW-Lupo-1999-Bosch-030906032E-ME7-5-10-EEPROM-95040?s=16b5f063078cc3cb047d09795bc8d6c0&p=3982687#post3982687 On 0x032 if have only FF for example. I have the same reading with the orginal ECU. I tested http://nefariousmotorsports.com/forum/index.php?topic=6134.0 too, nu success, on written EEPROM the ECU says the same again with the IMMO. :-( Could I only read the correct values with "boot mode"? Or works the reading/writing from the 95040 only desoldered? Where's my mistake? It would be great if the IMMO get off. I attach a dump. André Title: Re: 030906032CE IMMO OFF? Post by: blacktux on March 11, 2021, 10:48:37 AM Sorry, I forgotten the Dump.
That's the Dump from the spare ECU. Title: Re: 030906032CE IMMO OFF? Post by: Dave9n3 on March 12, 2021, 02:48:21 PM Test and report back :D
Title: Re: 030906032CE IMMO OFF? Post by: blacktux on March 13, 2021, 12:23:10 AM Thank you Dave,
yesterday I get it alone. ;-) I read out the dump with Boot Mode, adjusted the dump with the tool from this site and written it back. Works! The car runs again with the new ECU. The old one was defective. But, I didn't understand why I couldn't get it with my TL866II+ and my clamp. :-( André Title: Re: 030906032CE IMMO OFF? Post by: macxxx on March 13, 2021, 10:00:14 AM 95040 must be desoldered from PCB - you read it with a clamp
you have FFFF in place of pin and XXXX... in place of VIN etc because it's a IMMO2 ECU Title: Re: 030906032CE IMMO OFF? Post by: elektronik13 on March 13, 2021, 02:24:06 PM 95040 must be desoldered from PCB - you read it with a clamp don't tell nonsenseyou have FFFF in place of pin and XXXX... in place of VIN etc because it's a IMMO2 ECU this ecu is immo 3 Title: Re: 030906032CE IMMO OFF? Post by: macxxx on March 13, 2021, 02:56:41 PM Spare ecu dump has ffff and no vin immo id etc so it has to be immo2
Title: Re: 030906032CE IMMO OFF? Post by: elektronik13 on March 14, 2021, 03:44:53 AM Spare ecu dump has ffff and no vin immo id etc so it has to be immo2 You have to learn with ImmoTitle: Re: 030906032CE IMMO OFF? Post by: macxxx on March 14, 2021, 03:47:40 AM Ok maybe in vw with immobox is diffrent but Audi is as I write
Title: Re: 030906032CE IMMO OFF? Post by: elektronik13 on March 14, 2021, 04:08:41 AM Ok maybe in vw with immobox is diffrent but Audi is as I write you really do not have the knowledgethis ecu is immo 3 and it doesn't matter if it's Audi VW Seat or Skoda this is immo 3 and that's it and the fact that some ECUs can be connected to immo 2 is a different matter Title: Re: 030906032CE IMMO OFF? Post by: macxxx on March 14, 2021, 04:35:39 AM So tell me why there are no immo info in this dump? Is it a virgin one or its unversal and can be connected to immo2 ( then its says like this ) or immo3c( then the pin immo id writes)
|