|
Title: ESKONF on S4 G-Box 8D0907551G Post by: MetalForLive on March 25, 2021, 05:22:30 AM UPDATE:
I solved the Problem! On G Box ESKONF is not on 0x10C75 like it is described in S4Wiki. It is located on 0x10C81 I changed now Byte 5 (0x10C86) from 00 to C0 and Byte 6 (0x10C87) from F3 to FF I put my .xdf in attachments where I have ESKONF inclueded, maybe this helps someone in the future. For more details feel free to have a look on the third post from me in this thread. Good day Sirs! I have another N00b-question. I have coded out the post-catO2s, this has worked all along, but now I need to unplug an O2 probe completely and that throws me an errorcode (P1112). Everything whats written in S4 wiki in Rear O2 section I've already tried and it has not helped. Only the thing with ESKONF I could not test yet because I am very unsure how it works exactly. I have downloaded an M Box .bin here from the forum and I looked how it looks there, it's exactly the way how it's written here: http://nefariousmotorsports.com/forum/index.php?topic=615.msg25425#msg25425 (http://nefariousmotorsports.com/forum/index.php?topic=615.msg25425#msg25425) Quote Bits 6 and 7 need to be set at 10C7A and bits 2 and 3 need to be set at 10C7B to disable post cat O2 sensor heater amplifiers. Parameter Location Original(hex) Original(dec) New(hex) New(dec) ESKONF 10C7A 00 0 C0 192 ESKONF (M box) 10C7B F3 243 FF 255 ESKONF (L box) 10C7B C3 195 CF 207 On my G Box both values are "28", so I guess if I enter there the values as written in the S4 Wiki for M-Box it will not work or will it ? Can someone help me please ? Title: Re: ESKONF on S4 G-Box 8D0907551G Post by: MetalForLive on March 25, 2021, 06:57:54 AM Oh I scrolled a bit up in S4wiki and found the part about ESKONF.
Quote Byte 0: EV6 EV3 EV4 EV1 Byte 1: XX NWS1 LULK TEV Byte 2: XX EKP AKF XX Byte 3: XX XX XX SLP Byte 4: EV5 SLV XX NWS2 Byte 5: HSH2 ULT EV2 LDR Byte 6: XX BKV HSH XX Byte 7: XX XX XX XX Byte 8: ZUE ZUE ZUE ZUE Byte 10: ZUE ZUE ZUE ZUE Byte 11: XX XX XX XX Byte 12: XX XX XX XX I looked at the bits and set HSH and HSH2 to 11 and calculated it to hex. So for Byte 5 HSH it should be E8 and for Byte 6 HSH2 it should be 2C. I configure this now and flash this to my car and hope everything works properly Edit: Hmm seems not to work, this time it throws me P1112 sporadic, after deleting and some time driving it throws me P1122 What did I wrong ? Edit2: Okay I set now CDLSH the first bit to 1 and the remaining 7 bits to zero and try it again. Edit3: Nope allways the same, flashing then short driving, then Engine off and on => nothing, driving again a bit and engine off and on again and then Check Engine but this time with P1112 sporadic Title: Re: ESKONF on S4 G-Box 8D0907551G Post by: MetalForLive on March 26, 2021, 05:32:32 AM Okay I went through my ESKONF again.
Is it possible that it is simply in a different place than 0x10C75 ? Because once I break it down it doesn't make much sense to me. Look at the different values of the injectors (EV1-6) , why would there be something different on each one ? BTW. Byte 9 is completely missing in S4Wiki Quote Bytes Hex Binary Abbreviation per bit pair Byte 0: 06 00 00 01 10 EV6 EV3 EV4 EV1 Byte 1: 02 00 00 00 10 XX NWS1 LULK TEV Byte 2: A8 10 10 10 00 XX EKP AKF XX Byte 3: 0D 00 00 11 01 XX XX XX SLP Byte 4: FE 11 11 11 10 EV5 SLV XX NWS2 Byte 5: E8 11 10 10 00 HSH2 ULT EV2 LDR Byte 6: 2C 00 10 11 00 XX BKV HSH XX Byte 7: FE 11 11 11 10 XX XX XX XX Byte 8: 05 00 00 01 01 ZUE ZUE ZUE ZUE Byte 9: 16 00 01 01 10 ?? ?? ?? ?? Byte10: 00 00 00 00 00 ZUE ZUE ZUE ZUE Byte11: 05 00 00 01 01 XX XX XX XX Byte12: 00 00 00 00 00 XX XX XX XX Edit: Okay guys I think i figured it out. On M Box between KFKHFM and ESKONF are 31 Bytes any other stuff, I don't know what this is. I looked now at G Box 31 Bytes above KFKHFM and I think this is my ESKONF. KFKHFM G Box= 0x10CAD M Box= 0x10CA1 ESKONF M Box= 0x10C75 G Box= 0x10C81 As you can see in the pictures this looks much more like eskonf. I will now set Bytes 5 and 6 to this and try it again: Quote Bytes Hex Binary Abbreviation per bit pair Byte 0: 00 00 00 00 00 EV6 EV3 EV4 EV1 Byte 1: FC 11 11 11 00 XX NWS1 LULK TEV Byte 2: EF 11 10 11 11 XX EKP AKF XX Byte 3: FF 11 11 11 11 XX XX XX SLP Byte 4: 3C 00 11 11 00 EV5 SLV XX NWS2 Byte 5: C0 11 00 00 00 HSH2 ULT EV2 LDR Byte 6: FF 11 11 11 11 XX BKV HSH XX Byte 7: FF 11 11 11 11 XX XX XX XX Byte 8: AA 10 10 10 10 ZUE ZUE ZUE ZUE Byte 9: FA 11 11 10 10 ?? ?? ?? ?? Byte10: 55 01 01 01 01 ZUE ZUE ZUE ZUE Byte11: 55 01 01 01 01 XX XX XX XX Byte12: 55 01 01 01 01 XX XX XX XX Edit2: It works! Title: Re: ESKONF on S4 G-Box 8D0907551G Post by: kubawd on November 19, 2022, 05:36:48 AM Nice work, saved me a few minutes of searching. Thank you
|