|
Title: Difference between CAN bus for RNS-D and RNS-E Post by: BlackT on March 26, 2021, 11:16:48 AM What is difference between CAN-BUS communication for RNS-D, and RND-E
RNS D use TMC tuner to convert CAN-BUS signal from cluster to RNS-D. In elsa that signal is labeled as CAN-BUS(BOSCH) (https://i.postimg.cc/x1QrkLWC/tmstuner.png) (https://postimg.cc/KR0pw3cS) RNS-E is connected directly to navigation CAN-BUS in cluster Title: Re: Difference between CAN bus for RNS-D and RNS-E Post by: BlackT on March 28, 2021, 03:34:49 AM I checked with osciloscope signal before(RNS-D send) and after TMC tuner.(schould be same signal that RNS-E use)
Far as I can see these are both 100 kbs, and ISO 11898-3 Title: Re: Difference between CAN bus for RNS-D and RNS-E Post by: Stoti on June 27, 2021, 01:09:28 AM I have juat pullged in mine in gray connector pin 5 and 6 i think and everything works , Power on,off illumination and navigation information. I was doing emulator and i think it was 500 kbps but i cant remember i have to check
|