|
Title: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: Klavaro on April 08, 2021, 02:35:54 AM Hello everyone!
I have searched a lot but couldn't find any info about something like this, any info would be appreciated. I've got a '00's Mk4 Golf 1.8T AWD code, with 06A906032CL bin. Bought a wideband ecu from a Passat, with 4B0906018DC bin, which has a 05.12 bootrom. Anyone knows what bins could be most suitable for me? I'd be happy if I wouldn't need to modify a lot of maps. My engine has a K03, no EGT, no VVT. Thanks in advance :) Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: stuydub on April 08, 2021, 03:35:06 AM Use the correct BIN for the ECU..
Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: stuydub on April 08, 2021, 03:37:08 AM Get a ECU from a GOLF 032 HS HN HJ and do the necessary changes to disable VVT and deletes
Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: Klavaro on April 08, 2021, 03:48:44 AM Get a ECU from a GOLF 032 HS HN HJ and do the necessary changes to disable VVT and deletes Hopefully I can crossflash the Passat ecu, since I already bought it. If I'm right those bins are for AUM engine code, or similar, AUM has the K03s, wouldn't that be a problem? Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: _nameless on April 08, 2021, 05:31:35 AM You can't flash a mk4 file to anything usdm passat 018d?, it will brick the ecu. Also the passat case is not water proof and will forsure corrode the ecu on a short time
Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: fknbrkn on April 08, 2021, 07:17:04 AM You may flash mk4 file into 05.12 bootrom passat ecu with eeprom
But as marty said passat ecu are non-waterproof and you should seal it with silicone gasket or fit passat pcb into golf case with slighlty modified pcb - Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: Klavaro on April 08, 2021, 03:59:17 PM Thanks guys, I didn't know about the waterproof thingy. I searched half a day on eBay for an ecu near my country with a suitable bootrom. (All other ecus were 06.02 from passats/audis, no idea why no golf/A3/etc getting parted out in Eastern Europe)
Still K03 compared to K03s shouldn't matter that much regarding OEM bins, right? I don't plan running higher power than the 180 bins. After all I could make changes if something's way off. Title: Re: What bin should I use for a wideband conversion from a 150HP 1.8T engine? Post by: Sandstorm3k on April 08, 2021, 11:59:14 PM Thanks guys, I didn't know about the waterproof thingy. I searched half a day on eBay for an ecu near my country with a suitable bootrom. (All other ecus were 06.02 from passats/audis, no idea why no golf/A3/etc getting parted out in Eastern Europe) You should, i don't know the exact differences but look for them yourself and change accordingly. People have been swapping K03 for K03s without software so i can't imagine it'll be that bad. But while you're at it, might aswell compare maps and make sure.Still K03 compared to K03s shouldn't matter that much regarding OEM bins, right? I don't plan running higher power than the 180 bins. After all I could make changes if something's way off. |