|
Title: K boks to D boks Post by: Denner on April 22, 2021, 02:03:40 PM Hi everyone I have bought an rs4 motor with wiring harness and control box but car will not start so have mounted my s4 wiring harness and the car can start with my s4 control box but not with my rs4 control box it is possible to copy rs4 k box to s4 D box and sorry my bad english
Title: Re: K boks to D boks Post by: _nameless on April 22, 2021, 02:07:56 PM Hi everyone I have bought an rs4 motor with wiring harness and control box but car will not start so have mounted my s4 wiring harness and the car can start with my s4 control box but not with my rs4 control box it is possible to copy rs4 k box to s4 D box and sorry my bad english no start at all or start and die from immo? You can turn the immo off if thats the issueTitle: Re: K boks to D boks Post by: Denner on April 23, 2021, 09:00:54 AM no start at all or start and die from immo? You can turn the immo off if thats the issue Will not start I have made immo off Title: Re: K boks to D boks Post by: Jannik07 on May 02, 2021, 12:58:27 PM Hello,
Can you reach the K-Box with VAG COM or something when its attached? K box wont work with S4 Harness because it has more Sensors and/or other pin layout. Title: Re: K boks to D boks Post by: prj on May 03, 2021, 02:20:40 AM K box wont work with S4 Harness because it has more Sensors and/or other pin layout. Misinformation. It will work just fine, as long as a few things are re-configured.Title: Re: K boks to D boks Post by: Jannik07 on May 03, 2021, 05:21:16 AM I apologize. But I remembered its no plug and play solution.
Title: Re: K boks to D boks Post by: prj on May 03, 2021, 06:29:11 AM I apologize. But I remembered its no plug and play solution. It is. You will have DTC's for airbox flap and one half of NWS, but this is literally a couple eskonf bits to flip to turn off. I've been running 551K on every single car, no issues. OP has different problem. |