|
Title: ME7.5 Immo Deathcode? Post by: Steven97i1 on May 06, 2021, 02:57:27 PM hey guys i hagve an 06a906032HP ecu with immo off and stage 1.
when i Flashed the ecu all was fine i could start like 10 times and drive with i, i then parked the car for like 1 hour and the car wont start, and would not Connect to VCDS. I reflashed the Immo off Dump and the car was fine again. i drive like 50km with stage 1, all fine. then i parked the car for another 1 1/2 hours, same problem. No ecu connection. what could that be? maybie deathcode? Could someone explain me how i can recognize the Deathcode? I will upload bins later Title: Re: Re: ME7.5 Immo Deathcode? Post by: florih2 on May 07, 2021, 12:17:44 AM hey guys i hagve an 06a906032HP ecu with immo off and stage 1. Have you corrected checksums? Sounds alot like an checksum fault. when i Flashed the ecu all was fine i could start like 10 times and drive with i, i then parked the car for like 1 hour and the car wont start, and would not Connect to VCDS. I reflashed the Immo off Dump and the car was fine again. i drive like 50km with stage 1, all fine. then i parked the car for another 1 1/2 hours, same problem. No ecu connection. what could that be? maybie deathcode? Could someone explain me how i can recognize the Deathcode? I will upload bins later Title: Re: ME7.5 Immo Deathcode? Post by: Steven97i1 on May 07, 2021, 01:16:42 AM That could IT be! Me7eeprom Info is okay for that?
Title: Re: Re: ME7.5 Immo Deathcode? Post by: florih2 on May 07, 2021, 01:39:09 AM That could IT be! Me7eeprom Info is okay for that? Me7correction for the flashEeprontool or 95040 checksum corrector for the eeprom Title: Re: ME7.5 Immo Deathcode? Post by: Sandstorm3k on May 07, 2021, 01:54:37 AM I have a mate with similar problems. He messed with his own flash, and now car won't run.
I tried helping with spare ECU's, but I'm suspecting such an issue could also be wiring problems. Couldn't connect to any ECU using VCDS but they are not faulty, can flash in bootmode and they work in other car. The other day it'll fire up and run, next it won't. Title: Re: ME7.5 Immo Deathcode? Post by: stuydub on May 07, 2021, 02:17:24 AM I have a mate with similar problems. He messed with his own flash, and now car won't run. I tried helping with spare ECU's, but I'm suspecting such an issue could also be wiring problems. Couldn't connect to any ECU using VCDS but they are not faulty, can flash in bootmode and they work in other car. The other day it'll fire up and run, next it won't. CHECKSUMS INCOORECT fixed one yesterday that was doing the same Title: Re: ME7.5 Immo Deathcode? Post by: Steven97i1 on May 07, 2021, 05:08:33 AM Tankstelle guys for All the Tips! How can i correct in from eeprom? Thank you!
Title: Re: ME7.5 Immo Deathcode? Post by: Steven97i1 on May 07, 2021, 06:36:22 AM checked Checksum with eepromtool_04 and it says Checksum OK
|