|
Title: 2.0 TFSI Med9.1 I regulation Adaptation problem Post by: Lacee90 on May 12, 2021, 02:38:33 AM Hy All
I have problem with the i regulation adaptation after some pulls. The adaptation values (group 111) go up after some driving cycles to 10-20% and cause higher overboost on wot. I dont have underboost so im dont know the ecu why make positive adaptation. I read the s4 wiki and im find the map sensor limit problem. I need increase the LDEIAP and TLDIAPN? My requested boost is 2300mb. Usualy i have 150-200 mb overboost after spool and go down to 2300mb . Somebody have any idea? Thank you for the help. Title: Re: 2.0 TFSI Med9.1 I regulation Adaptation problem Post by: nyet on May 12, 2021, 11:45:59 AM I need increase the LDEIAP and TLDIAPN? Fix your pid. DO NOT touch those maps. You shouldn't have to. Also post logs, its one of the *damn forum rules* I don't understand why i have to keep posting this. http://nefariousmotorsports.com/forum/index.php?topic=12361.0title= http://nefariousmotorsports.com/forum/index.php?board=48.0 I really don't get it why people post w/o at least reading a few of the rules Title: Re: 2.0 TFSI Med9.1 I regulation Adaptation problem Post by: Lacee90 on May 13, 2021, 11:37:17 PM Sorry. I post logs afternoon.
Title: Re: 2.0 TFSI Med9.1 I regulation Adaptation problem Post by: Lacee90 on May 14, 2021, 09:48:37 AM I find the problem.tldiapn in a k03 car is -40. In a ori s3 file is +10
All other boost adaptation maps are same. I change this value in my file and now my adaptation in chanel 111 is : 2% 0% 0% 2(http://)%. Before this mod near 20% in all ranges. Now im make a correct kfldimx based on ori s3 map. Kfldrl is full stock from s3 file. I need add more imx for higher rpms. But almost complete. I hope i can help other people with same problem. |