|
Title: Original File 022 906 032 CN G4R32 And XDF Post by: Burnman6666 on May 12, 2021, 05:01:20 PM Hello I have a Mk4 R32 with 022 906 032 CN Ecu.
My Ecu is chipped so i cant Read a Original File from it. Even iam looking for an XDF File for this ECU to use it in Tunerpro. Most important for me are the Parameters for changeing the injectors. I have Build a Turbo Engine with big injectors and would like to use the original Me7 for first start and run in idle before i get in to wiring a Emu Black Ecu. Thanks very much. Kind Regards Rene Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: nyet on May 12, 2021, 05:15:25 PM Wrong forum. Moved, since you need an ORI to request an XDF anyway
Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: _nameless on May 12, 2021, 06:50:41 PM Hello I have a Mk4 R32 with 022 906 032 CN Ecu. I have a solution for mono lambda, load patch and speed density conversion if youd like to stick with the stock ecu. Upload your original and list of maps you need ill find them for you My Ecu is chipped so i cant Read a Original File from it. Even iam looking for an XDF File for this ECU to use it in Tunerpro. Most important for me are the Parameters for changeing the injectors. I have Build a Turbo Engine with big injectors and would like to use the original Me7 for first start and run in idle before i get in to wiring a Emu Black Ecu. Thanks very much. Kind Regards Rene Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: Burnman6666 on May 14, 2021, 04:24:05 AM Hello Marty, thank you very much for your offer.
I attached the file from my Ecu. But its not Stock. Would be great if i could get a XDF for this to modify it for 950 bosch Injectors. I think it should might be the same as Me7 1,8t. Tmin and krkte ? I have already bought the Emu because i want to convert the car to dq500 in the future. But i want to use the me7 to check the engine. Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: _nameless on May 14, 2021, 08:42:33 AM Hello Marty, thank you very much for your offer. I attached the file from my Ecu. But its not Stock. Would be great if i could get a XDF for this to modify it for 950 bosch Injectors. I think it should might be the same as Me7 1,8t. Tmin and krkte ? I have already bought the Emu because i want to convert the car to dq500 in the future. But i want to use the me7 to check the engine. If you can i would be in your best interest (imo) to start the car on the stock injectors if its a fresh build. You dont want to fuel wash your new build as soon as you turn it over Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: Burnman6666 on May 14, 2021, 12:28:32 PM Hello Marty , Normaly a good idea but i have a special intake Manifold which includes a watercooled Intercooler. To change the injectors i have to disasamble the complete Manifold.
Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: _nameless on May 14, 2021, 01:04:59 PM Hello Marty , Normaly a good idea but i have a special intake Manifold which includes a watercooled Intercooler. To change the injectors i have to disasamble the complete Manifold. heres what you asked for also tvub for proper dead times Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: RBPE on May 15, 2021, 02:40:54 AM Theres a full 032cn def file in ols form on the forum too
Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: Burnman6666 on May 15, 2021, 02:51:50 AM Thank you very much Marty , will try later.
RBPE thanks for the Info. Will look for it. Title: Re: Original File 022 906 032 CN G4R32 And XDF Post by: Burnman6666 on May 15, 2021, 06:20:58 PM I loaded the file into Win Ols. Works fine but i cant save because i have only a demo version.
I tried to get the Information of the CSV to a new Xdf file in Tunerpro but the values seems different to win ols. Maybe Somebody with Full Win Ols License can convert the .kp to xdf for me? Thanks Rene |