|
Title: It is possible to convert vag k+kommander cable to use with me7logger? Post by: BlackT on May 28, 2021, 01:49:31 PM I have vag k commander 1.4 cable, nefmoto flasher work like a charm. But Me7logger say error code 4, no connection to ECU?
Also VCDS lite doesen't work, when i go to test it say okay, but i can not connect to ECU. With K commander software I can connect to ECU Is it possible to make some changes on cable so it can work with ME7logger and vcds lite? Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: BlackT on May 28, 2021, 03:06:41 PM I desolder PIC MCU from this cable.
After that nefmoto flasher still work, but from logger now I get message "error 1" no echo from cable. Than I change setings in logger (look in attachment) and it works :D Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: stuydub on May 28, 2021, 03:13:05 PM My 1.4 cable works with logger and vcds
Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: BlackT on May 30, 2021, 05:42:45 AM Can you take a picture of board?
Mine still doesen't work with vcds lite. But nefmoto and me7logger work like a charm Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: stuydub on May 30, 2021, 11:26:01 AM Can you take a picture of board? Mine still doesen't work with vcds lite. But nefmoto and me7logger work like a charm Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: BlackT on June 01, 2021, 12:39:52 AM Hmm looks same like mine.
I got same message when I do test in vcds. But can't connect with any module With what ECU you can connect with me7loggger and do you use SLOW 0x11 or slow 0x01? Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: stuydub on June 01, 2021, 01:04:39 AM Me7.5
Title: Re: It is possible to convert vag k+kommander cable to use with me7logger? Post by: Blazius on June 01, 2021, 06:44:14 PM If its an A4, or etc, always use slow 0x00(if using visualme7logger, you need to manually type it in , you cant choose it or save it) its needed because of the cluster/immo, ignition on, then connect then it works. Can confirm this is the only way me7logger works for me, even with ch340 bullcrap cable. Cant help with the vcds lite issue, never needed to use lite :)
|