|
Title: How to disable misfire detection at idle in L box ? Post by: s4man111 on June 09, 2021, 01:29:15 PM Hey guys 2001 s4 b5 8D L box ecu. Can someone tell me how I can disable misfire detection at idle in this L box?
Title: Re: How to disable misfire detection at idle in L box ? Post by: nyet on June 09, 2021, 01:35:07 PM For the purposes of LC/NLS? Does not belong here, and is an extremely difficult topic unless you are very good with C16 ASM
Title: Re: How to disable misfire detection at idle in L box ? Post by: s4man111 on June 09, 2021, 02:08:00 PM For the purposes of LC/NLS? Does not belong here, and is an extremely difficult topic unless you are very good with C16 ASM ok, what parameter needs to be changed please? Title: Re: How to disable misfire detection at idle in L box ? Post by: nyet on June 09, 2021, 03:06:27 PM You didn't answer the question.
Title: Re: How to disable misfire detection at idle in L box ? Post by: Norwegian1.8T on June 09, 2021, 03:13:42 PM Taken from the S4Wiki, not sure if this is what you're meaning.
RLSALULL - Load threshold for shear detection for suppression of misfire detection during idle If your load at idle is higher than RLSALULL, misfire detection is enabled. Correct me if i'm wrong :D Title: Re: How to disable misfire detection at idle in L box ? Post by: nyet on June 09, 2021, 03:49:51 PM Disabling misfire detection is not recommended, in general.
Even to avoid the emissions DTC, you're looking at an uphill battle. Title: Re: How to disable misfire detection at idle in L box ? Post by: Norwegian1.8T on June 09, 2021, 04:09:47 PM The real question is why is your idle load so high?
|