NefMoto

Am unable to find the SKC from my Audi TT cluster dump.

I read it through VAG k+ Commander 1.4, with the setting: Mangeti Mareli - Direct

I searched through the dump for the AUZ, but the first two decimals are 2E 3A, and that is 11833, which is too long?

Thanks for help.

>>>>> 05332 <<<<<

Thanks for taking the time!

When i try to login to Instruments (17) with the SKC i get "Login Code Not Accepted by Controller. You will have to turn the ignition OFF for awhile before trying again."

I have tried this with my kkl 409.1 CH340 cable. I have tried using VCDS lite 1.2, VCDS 3.11-2 (Activated).

I have been able to login to my ECU by using SKC (65535, since it's immo2) with both VCDS lite 1.2 and VCDS 3.11-2 with my KKL cable.

I also notice that everytime i read the eeprom from my cluster i get a slightly different dump, where some of the values have changed.

Any idea what the problem might be?

Nevermind, i got it working!

I dont know why, but maybe i had to wait 1 hour instead of a few minutes?

Anyway thank you so much! The car is finally running again for the first time in a year due to immo problems :)

hi. can you find me pin from my dump?


edit: i find it 01226

I just found a pin for dump too