|
Title: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 17, 2021, 08:18:37 AM Hi hoping someone can help me out here. I need the gear tooth count data transferring from a later 0d9 mapfile and transferring into an earlier cxx 02e mapfile. Is that something that can be done. I have managed to pull the file from the earlier tcu that needs editing but can't read the later one at this minute in time.
Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 17, 2021, 09:31:46 AM I have posted my old mech mapfile but struggling to get the the mapfile from the newer one. But yes exact problem that you mention. I have the vcds readout from the newer one if that helps or if anyone has the original file to pull data from
Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 17, 2021, 09:44:03 AM Yes I know this. Im struggling to read the 0d9 mech but if doing the ratio change is something someone could do then that would be fantastic. All I have of the 0d9 at the minute is this vcds readout. I'm trying to find an original file or read the tcu but kess v2 isn't reading it.
Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 17, 2021, 11:03:22 AM I can hopefully get the mapfile for you in a couple of days. Or the data numbers you require. I will update soon thanks for your help so far much appreciated
Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 24, 2021, 07:47:55 AM Hi sorry its been a while not had access to my stuff. Dq250-6a mqb h53 4504
Is that the code you require? Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 24, 2021, 10:14:33 AM Sorry if I'm being stupid here. This is what I get on vcds
Title: Re: Gear ratio transfer on dq250 dsg mapfiles Post by: andyc1234 on July 24, 2021, 12:25:52 PM Think I get it now software number would be 0d9300012e 4504
|