|
Title: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 16, 2012, 06:34:16 AM Hey,
I am in the middle of switching to an M-box ECU and the only DTC i can't figure how to code out is the following: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 - 35-00 - - European models do not have a EVAP Leak Detection Pump. Any ideas? Thanks Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: elRey on May 16, 2012, 07:49:10 AM ESKONF
Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: masterj on May 16, 2012, 09:01:18 AM zero out CLALDPE.
Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 16, 2012, 12:45:55 PM zero out CLALDPE. Do you happen to know the address of CLALPDE in an M-box code i don't see it in any XDF files, I can only see CDLDP.Thanks Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: elRey on May 16, 2012, 01:04:11 PM zero out CLALDPE. I don't think this will address the 'Open Circuit' DTC. Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: masterj on May 16, 2012, 01:08:08 PM I don't think this will address the 'Open Circuit' DTC. it will disallow me7 to store DTCs: P1471, P1472 and P1473 Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 17, 2012, 12:03:49 AM it will disallow me7 to store DTCs: P1471, P1472 and P1473 Can you give me some pointers please? Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: masterj on May 17, 2012, 12:40:39 AM Can you give me some pointers please? just zero out map I've said earlier Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 17, 2012, 12:57:14 AM just zero out map I've said earlier Sure, I would do that, but I can't seem to find that map in any of the xdf files available for the M-box, that's why I would like to know the address of the MAP so I can add it to the XDF. Thanks Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: masterj on May 17, 2012, 02:35:58 AM Sure, I would do that, but I can't seem to find that map in any of the xdf files available for the M-box, that's why I would like to know the address of the MAP so I can add it to the XDF. Thanks You could try comparing my ols file to your bin... http://nefariousmotorsports.com/forum/index.php?topic=1193.msg18747#msg18747 (http://nefariousmotorsports.com/forum/index.php?topic=1193.msg18747#msg18747) Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: elRey on May 17, 2012, 09:27:16 AM it will disallow me7 to store DTCs: P1471, P1472 and P1473 Ah, I see. But it still tests for open circuit, it just doesn't store the error. ESKONF change will remove valve from open circuit testing. '6 one way 1/2 dozen the other' Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: masterj on May 17, 2012, 12:08:13 PM Ah, I see. But it still tests for open circuit, it just doesn't store the error. ESKONF change will remove valve from open circuit testing. '6 one way 1/2 dozen the other' Offtopic: Maybe you know some way to disable postcat o2 sensor open circuit test? Or rather all the tests related to postcat o2? Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 17, 2012, 02:24:33 PM Ah, I see. But it still tests for open circuit, it just doesn't store the error. ESKONF change will remove valve from open circuit testing. '6 one way 1/2 dozen the other' And do you have the address of ESKONF in the 2.7T M-box file? Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: elRey on May 17, 2012, 04:36:52 PM I believe it's 10C7D
Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 17, 2012, 10:24:47 PM I believe it's 10C7D I have a value of 170.0 at that address. Does that sound reasonable? Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: elRey on May 18, 2012, 06:17:58 AM ESKONF is 7 bytes (7x1)
Do you have the ME7 doc? Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 21, 2012, 11:05:12 AM ESKONF is 7 bytes (7x1) Do you have the ME7 doc? No i do not have the doc :( Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rob.mwpropane on May 21, 2012, 07:11:18 PM Yes you do! All docs are posted at the top of this sub forum. All downloadable free of charge.
Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 23, 2012, 12:09:01 AM Yes you do! All docs are posted at the top of this sub forum. All downloadable free of charge. Oh great, looking!Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: Matt Danger on May 26, 2012, 09:58:53 AM Sure, I would do that, but I can't seem to find that map in any of the xdf files available for the M-box, that's why I would like to know the address of the MAP so I can add it to the XDF. Thanks There is a G-Box XDF posted here somewhere that shares many (all?) of the M-Box addresses but is better defined. All the EVAP stuff is defined in that XDF. Either use that or copy the addresses to your M-Box XDF Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: rnagy86 on May 28, 2012, 09:16:18 AM There is a G-Box XDF posted here somewhere that shares many (all?) of the M-Box addresses but is better defined. All the EVAP stuff is defined in that XDF. Either use that or copy the addresses to your M-Box XDF Thanks i will look into that. I am currently running with CLALDPE zeroed out and it works greatTitle: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: nkady on November 09, 2017, 02:43:28 AM Thanks i will look into that. I am currently running with CLALDPE zeroed out and it works great hy, can you help me with address of the CLALDPE map, i have the same problem. Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: pudeleq on June 30, 2018, 08:39:28 AM Hello, sorry for digging topic, but I need address for CLALDPE for M-box, because of DTC P1473. I want to zero it out. I'm trying with ESKONF, but it doesn't work. Thanks for help!
Title: Re: code "17881 - EVAP Leak Detection Pump: Open Circuit" out Post by: pudeleq on June 30, 2018, 08:51:13 AM I found it. CLALDPE is 0x10712, works perfectly
|