NefMoto

Just my 2c back to nefmoto
This is multimap routine ive made 7yrs ago for ldrxn / zk and kfzw/2 switching with clutch and cruise stalk
Indicates with tacho needle
So you should hold the clutch and then tap set btn. On first tap it shows current selected map on tacho and after 1s returns to nmot if not pressed again. If pressed again it loops through maps_qt on every tap
Could be switched anytime even on wot  :o
Not used eeprom so returns to 1st set when ecu lost power

Xdf included
Maps_qt: num of sets in range of 1-4
Stock ldrxn/kfzw maps ignored

Bugs: clutch indicates warning of low oil pressure when engine is off or idling (on some engines) and tacho shows selected map with 2000+ rpm due to no oild pressure :)

Do not blindly flash included file. Its not checksummed and ldrxn / kfzw values are definetely not for a stock engine. Only for education purpose
Good luck!

Hello
I wanted to check your files, but i've got xdf error, fgt2 dll missing, windows vista and above detected, and tunerpro just crashes. Is there a way to open your xdf?
Thx in adv

Thanks for sharing, it is very educational, shows how same things can be achieved differently. Applaud!

Cool stuff, thanks for sharing!

Thanks for sharing your work. I dont work on this platform but am always interested in learning more about how to do these things.

Thanks for sharing it. Can you tell how does it work? I could see functions at 8B4D00 8B4000 8B4700. Maps are stored from 8B5000.  8B4D00 seems to show the current map on odo with changing nmot. I could not find how to change map from 8B5000 to the ram.

Thank you

thank you  ;)

is it possible to integrate KRKTE?

Of course it is.
It's even possible to make ME7 control coffee machine.

Is it possible for you? Probably not if you need to ask.

Krkte and kftsrl was implemented aswell for mr LoursRose

For those who want some modifications of the code - ask me in pm. DSG multimap based on selected dsg mode also completed. Pm for details. Not a free service.

hello
does this file work with ME7.5 audi S3 1.8T BAM?
THANKS

Hello, I've been playing this hobby for 2 years, I don't understand everything, language problems, translations, etc. I'm weak in computer science, but I understand engines well. I'm thinking about making a multimap because my son has a driving license and I'm afraid to borrow a car. I modified the car and tuned it to about 240 hp. I remember myself 25 years ago when I was driving a 55 hp car. The thing is, I'm using tunerpro and I can't find a bin that matches your bin. I've tried different bin files that I can't seem to match, even files with a different ID number. I guess I should switch to wineols and watch the 2D data viewer. Or maybe as a courtesy you can upload a bin file that matches. Greetings from Poland.

06A906032HJ 0002 stock and definitions available here at nef

Hello,

I’ve PM’d you a while ago, could you please reply?


Thanks,

please look at the PM

who could sell me at a good price the 1.8T multimap xdf+bin file for S3 8l bam 225cv?
thanks