|
Title: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: _Bubik on August 29, 2021, 05:39:19 AM Hi,
I need to help with more power to my car. I don´t know what can I do now. First few informations... Sorry for my English....xd I am newbie in this, so please... if I´ll have something wrong...please correct me. But I am trying to understand all of these things. It is Skoda Octavia 1.8t AUM VW HW: 06A906032HJ SW Bosch: 1037362287 HW Bosch: 0261207436 Original is 110kw, but there is some chip, so there was lamfa edited and little bit more things. And there is 3inch downpipe to 2,5inch full. From hardware it is all. I have already modified my soft. I have pops and bangs after 3500rpm, hardcut on 6400rpm, deleted SAI, rear lambda and now some "more power". I spent lots of hours to study this topic, but I am still doing something wrong. I want to from my car 1-1,1bar on turbo in peak and 0,85-0,9bar to redline, which I have it on 6400 via hardcut limiter. But I can´t beat 5200rpm with my specified pressure. (I will post my logs, but I am not at home now.) I have specified boost about 0,92bar in 5500rpm and on 3th, 4th and 5th gear car shut down specified boost to 0,5bar and it does not want to go higher to end of rpms. I edited: KFMIRL- in problem sectors - in 5000-6500rpms - are values from 1.8t S3 APY KFMIOP- edited really little bit, I can say "gently"...idk if I am able to modify this, on S4wiki say to not edit this, but here some people say it´s right to modify kfmiop, so I am confused LDRXN- peak is 170 and in redline I have 158 and there is linear course LDRXNZK- there are little bit smaller values than LDRXN KFLDHBN- there are little bit bigger values than have APY on 5000-6500 range at -9 to 70 on Y axis This is all, because lamfa for example was edited from previous human from that chip. From logs lamfa looking good, there aren´t knocking. What can I do more for my specified boost? Please help and be criticall. I want to know these things right. Is here anybody which have AUM/AUQ with GOOD and SAFE stage 1? I really want to see that soft and learn it more. Regards Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: _Bubik on August 29, 2021, 05:50:21 AM Should I update KFLDMIX?
Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: fknbrkn on August 29, 2021, 06:02:11 AM No
Post logs Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: _Bubik on August 29, 2021, 07:12:25 AM Here is log with pecified + actual boost, MAF and N75.
Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: _nameless on August 29, 2021, 08:31:18 AM Here is log with pecified + actual boost, MAF and N75. Ue me7 logger vcds logs are useless Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: Breacking on August 31, 2021, 07:40:53 AM little data. Publish your firmware and additional logs. Everything is good in the 115th group. The request is equal to the actual one.
Title: Re: HELP ME >.< 1.8t Octavia AUM Stage 1 Post by: _Bubik on August 31, 2021, 09:03:57 AM Thank you for replies, I will do log next week at the latest.
|