|
Title: BMW F07 dme cloning with Ktag - checksum error Post by: Proto61 on October 24, 2021, 12:50:21 PM Hello all,
I want to clone my bad DME Mevd17.2 N55 F07 2013 to a used but good Mevd17.2 N55 F10 2010. I have a Ktag clone 7.020 software 2.25 Tried to do a backup from my ecu (F07) with the gpt protocol. When I try to save the files I get a checksum error and it only saves 1 file with 1406 KB. I have tried also to read micro and eeprom separately. eeprom is fine but micro shows again checksum error. SW: 00000D07596401 SW upg.: 00000AE7596406 I have tried to do a backup from the other ecu it had diffrent protocol without gpt. I had no errors, it saved with 3 files: 1 x file, 1 x .epr file and 1 x .mpc file. all good. So my question is, is my old dme not readable or what could be the issue and how can I solve that? Btw I have C++ versions installed. I am new to all that its my first time doing it, I would appreciate any help thanks. Title: Re: BMW F07 dme cloning with Ktag - checksum error Post by: markhodges78 on January 19, 2022, 10:58:08 AM Have you tried replacing the dll folder in Ktag with the unpacked dll's ? I had the same problem and this was 1 of the things I did to fix it
|