|
Title: 1.8T MY2000 06A906032C 521KB. ECU not found after flash attempt. Post by: iborisov on November 02, 2021, 09:33:38 AM Hello all,
These days I tried to upload a simple Stage 1 to a friend. I used MPPSv16 because I know it works with ME7.5. I have remapped my car a hundred times with this MPPS. After several unsuccessful attempts to read and remove the fuses the file was taken. Then I changed the file with WinOLS and attempt to upload it to ECU but unsuccessfully. After some attempts with immo bypass yes/no and speed options Medium/Slow it end with an error "ECU not found". All good so far but now I can't even read ECU ID and VCDS do not respond. What could have happened? The car starts without a problem (for now). :) Thanks. Title: Re: 1.8T MY2000 06A906032C 521KB. ECU not found after flash attempt. Post by: _nameless on November 02, 2021, 09:54:41 PM Hello all, Mpps does bootmode flash it outside the car should be fine unless eeprom/ flash error or hardware damage These days I tried to upload a simple Stage 1 to a friend. I used MPPSv16 because I know it works with ME7.5. I have remapped my car a hundred times with this MPPS. After several unsuccessful attempts to read and remove the fuses the file was taken. Then I changed the file with WinOLS and attempt to upload it to ECU but unsuccessfully. After some attempts with immo bypass yes/no and speed options Medium/Slow it end with an error "ECU not found". All good so far but now I can't even read ECU ID and VCDS do not respond. What could have happened? The car starts without a problem (for now). :) Thanks. |