|
Title: no programmer detects ecu Post by: Patryk69 on March 04, 2022, 03:21:59 AM Hello. I made changes to the maps in the 06a906032as driver, I uploaded the changes 5 times because I changed something all the time and everything was ok, the checksums were counted each time, after inserting the driver into the car and testing, I wanted to improve something else, but none of the programmers detects the ECU, mpps v13, mpos v18, kess, nefmoto flasher, galletto 1260, I also tried to do bootmode mpps but the same is the boot error every time I struggled for 8 hours, and the best vcds normally detects ecu and works. I just managed to do bootmode galletto1260 but after that still none detects the ecu. What's the problem?
Title: Re: no programmer detects ecu Post by: xXxCryxXx on March 04, 2022, 03:26:24 AM Hello. I made changes to the maps in the 06a906032as driver, I uploaded the changes 5 times because I changed something all the time and everything was ok, the checksums were counted each time, after inserting the driver into the car and testing, I wanted to improve something else, but none of the programmers detects the ECU, mpps v13, mpos v18, kess, nefmoto flasher, galletto 1260, I also tried to do bootmode mpps but the same is the boot error every time I struggled for 8 hours, and the best vcds normally detects ecu and works. I just managed to do bootmode galletto1260 but after that still none detects the ecu. What's the problem? Do you have a full backup of the ecu data? EEPROM and flash? Is it possible to write on MPPS VIA recovery? In most of the tools they ignore then the „ID of ECU“ so they flash that what you say without knowing the ID Gesendet von iPhone mit Tapatalk Title: Re: no programmer detects ecu Post by: Patryk69 on March 04, 2022, 04:37:58 AM I have ori eeprom and immo off because I was doing conversions with me3. 8.3 on me 7.5 and I did everything from scratch. I tried to re-load the EPROM also does not work because I thought that something could have changed in the emprom
Title: Re: no programmer detects ecu Post by: Patryk69 on March 04, 2022, 04:39:24 AM I mean I tried to upload emprom from scratch bootmode but unfortunately I can't do it either
Title: Re: no programmer detects ecu Post by: xXxCryxXx on March 04, 2022, 05:37:36 AM I mean I tried to upload emprom from scratch bootmode but unfortunately I can't do it either Did you try do desolder the Chip an wrote with programmer?Gesendet von iPhone mit Tapatalk Title: Re: no programmer detects ecu Post by: Patryk69 on March 06, 2022, 09:07:57 AM no, I didn't, because I have nothing to do
|