|
Title: How to create a logging template for Me7Logger for 3 bar MAP Post by: vtraudt on March 04, 2022, 06:41:40 AM I can't figure out how to make a template for my 3 bar MAP. When logging, boost values only show 1/2 of the actual boost.
BIN file attached if someone wants to help. Title: Re: How to create a logging template for Me7Logger for 3 bar MAP Post by: justinvw2646 on March 05, 2022, 06:12:35 PM If you open the .ecu file you are using in ME7logger or visualloggger you will see all of the variables and you can change the factors. It has been forever since I did mine so sorry my answer isn’t more specific
Title: Re: How to create a logging template for Me7Logger for 3 bar MAP Post by: vtraudt on March 05, 2022, 06:24:11 PM If you open the .ecu file you are using in ME7logger or visualloggger you will see all of the variables and you can change the factors. It has been forever since I did mine so sorry my answer isn’t more specific Yeah, that part I know (make ECU and CFG file from bin, select logging parameters, etc). My issue: I am using a 3 bar MAP sensor and all the values for boost I am logging are only HALF of the actual values. There is this "5120" thing I think floating around. But I don't know how to MAKE a logging file (or what i need to change to my files) to allow LOGGING ACTUAL boost values with 3 bar MAP. Title: Re: How to create a logging template for Me7Logger for 3 bar MAP Post by: prj on March 06, 2022, 02:48:14 AM Open .ECU file in notepad, change factors to half.
|