|
Title: Tuner Pro crashing in MLHFM Post by: njallday on March 06, 2022, 01:08:47 PM Hey all,
I'm attempting to convert an M box to a Bosch MAF by adjusting MLOF and copying the table over for MLHFM. I'm doing this because I can't find a well defined enough A box XDF, and to my understanding, mbox is simply a better way to go. I'm doing a simple stage 2 with LC, 17psi, some timing, and of course trying to convert to a bosch maf. It seems no matter what Abox XDF I try and use while viewing my stock .bin, I crash tuner pro in one way or another. I really don't want to copy each individual value manually. Is the only solution learning to use WINOLS for this "very simply" problem lol? Any feedback is appreciated. Yes I know I can just wire in a hitachi. I have a spare hitachi and harness, but don't want to cut the harness up, and honestly, I really won't learn much that way, so trying to get more experienced on the tuning end of things. Thanks in advance. Title: Re: Tuner Pro crashing in MLHFM Post by: Jannik07 on March 07, 2022, 02:51:03 PM Hello!
I have sometimes similiar problems with TP. It crashes mainly when any address is wrong. For Example you want to have a 16 bit Map but your Address is odd. Then there are problems sometimes. Make sure everything is defined right. For stuff like this I also use winols. If you want to control your stuff there is almost no way around it. Especially when you want to search maps or stuff like that. Good luck! Title: Re: Tuner Pro crashing in MLHFM Post by: njallday on March 08, 2022, 08:03:20 PM Fair enough, I got into this for the basics, but it seems winols is a better tool anyway. I'll do my due diligence and learn some more.
|