|
Title: Immo off 036 906 016 BT Post by: vserena82 on March 12, 2022, 06:34:18 AM hello,
I have to remove immobilizer from this ecu, the problem is that this one was sealed with silicone and is not possible to remove the board and I have not direct access to eeprom. I have access only to back of board. There is an indirect way to read and write immobilizer eeprom? I give you a picture of back side of the board Title: Re: Immo off 036 906 016 BT Post by: elektronik13 on March 13, 2022, 03:27:57 AM hello, through the BDM connectorI have to remove immobilizer from this ecu, the problem is that this one was sealed with silicone and is not possible to remove the board and I have not direct access to eeprom. I have access only to back of board. There is an indirect way to read and write immobilizer eeprom? I give you a picture of back side of the board Title: Re: Immo off 036 906 016 BT Post by: vserena82 on March 13, 2022, 11:57:44 AM through the BDM connector Could you suggest me hw and sw tool that are needed? Title: Re: Immo off 036 906 016 BT Post by: elektronik13 on March 14, 2022, 02:19:31 AM Could you suggest me hw and sw tool that are needed? Ktag, kess, bdm100, or others of this type |