|
Title: ISO 8N0906018T xdf file for a 2001 audi TT 225/6spd Post by: nickw on March 23, 2022, 06:11:00 PM I hope Im posting in the right section here, Im looking for a 8N0906018T .xdf file for a 2001 Audi TT 225/6spd car, I've looked around on here and only found a .kp file for Winols that's completely in German. I started translating the .kp file to English but have found some of the maps don't line up with my .bin at all, I've also cross referenced my .bin with another .bin off here that is stock and both are identical so the car isn't tuned causing the .kp file to be off. I've also tried cross referencing with other "fully defined" bins to create my own .xdf/.kp and have had no luck their either and lastly resorted to trying to locate maps via Winols but am completely new to it and am butchering it. I just looking for enough of a .xdf to make a "stage 1 - stage 2" tune for now. I've attached the .bin below. TIA
The ecu number is - 8N0906018T The ecu software is - 354508 Title: Re: ISO 8N0906018T xdf file for a 2001 audi TT 225/6spd Post by: BlackT on March 23, 2022, 11:35:37 PM If your car don't have ECM relay, croshflash it to F(you need boot mode), there is a full def for F
Done Title: Re: ISO 8N0906018T xdf file for a 2001 audi TT 225/6spd Post by: nickw on March 24, 2022, 04:12:58 PM I grabbed a 8N0906018F file from here and also the 8N0906018F xdf and .ori files and nothing seems to line up in winols or tunerpro for me, all the data is jumbled around
Title: Re: ISO 8N0906018T xdf file for a 2001 audi TT 225/6spd Post by: nickw on March 24, 2022, 04:46:49 PM Correction. Most of the maps are lining up however the LAMFA map is completely wrong, any idea what the addresses are for this map?
Title: Re: ISO 8N0906018T xdf file for a 2001 audi TT 225/6spd Post by: BlackT on March 24, 2022, 06:52:45 PM Beacuse 512kb ecu use BTS for fueling nit LAMFA
|