|
Title: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT) Post by: EcuMan on March 30, 2022, 04:39:06 AM Hello guys,
I try to create Pops & Bangs for my Audi A4 B6 2.0 ALT (automatic gearbox) with A/C on but I'm not able to find the right DNWEK value. I found one with the stock value 80 rpm and changed it to 8000 rpm but it's not working. CWSAWE, KFTVSA and KFNWEGM would be also nice. Maybe someone can help me out? Thank you very much! Title: Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT) Post by: TFRAG on April 23, 2022, 05:23:17 AM Hi, I did it on my car, but through other cards, if interested, I can share my experience.
Title: Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT) Post by: adam- on April 23, 2022, 12:41:28 PM Hi, I did it on my car, but through other cards, if interested, I can share my experience. You'd have been quicker 'sharing your experience' than typing that. Title: Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT) Post by: TFRAG on April 30, 2022, 08:06:08 AM Here are all the addresses that need to be changed
CWSAWE - $ 11969 (возможно, должны быть протестированы nulls рядом с этим адресом) KFZWMN - $ 125F1 KFTVSA - $ 198A7 KFTVSAKAT - $ 198CF CWSAWE you need to change the value of 0 to 1 KFZWMN minimum ignition after 3000ob/min the last two lines at low loads are -19.5 and the third from above is -9.75 for a smooth transition KFTVSA delay time 1.5sec after 3000ob/min on the second KFTVSAKAT card as well, only here in ms Here is my firmware, the machines are the same, there are already all the changes, but I'm not sure about CWSAWE But it seems to have too big angles |