|
Title: 5120 Hack - No Boost - ThrottlePlate is not opening full. Post by: benni4000 on April 24, 2022, 03:37:32 AM Hi Folks!
I've got a problem with my S3 K04-023 Upgrade. When i programm 5120 Hack, the Engine does have boost, Thottle does not open complete. Original 1.5 Map sensor is installed so DSLOFS and DSLGRAD has been halfed. When i enable CWMDAPP and put KFLDRAPP to 60% it's the same problem -> Throttle is also not fully opening VCDSPatch is also included. Without Hack and Stage the Car goes like hell :D! Stock with Hack the DTC 17605 Divider Valve mechanical Problem is set. But divider is good. I've also got a Audi A4 where i've programmed the 5120 Hack without any problems, why is it here on my S3? Does someone knows how to install it correct? Logs and Bin are attached Thanks for any help! Title: Re: 5120 Hack - No Boost - ThrottlePlate is not opening full. Post by: Norwegian1.8T on April 24, 2022, 12:31:02 PM RAPP will only affect N75 duty cycle. Did you do the 5120 ASM yourself aswell as ediitng maps?
I would highly recomend to get an already done known working 5120 hack file and cross flash that to yours. Cant really help you dissasabmke an whole bin and redo all the load maps, if you know what you're doing there is many lists on here that shows what maps needs to be changed. Title: Re: 5120 Hack - No Boost - ThrottlePlate is not opening full. Post by: benni4000 on April 24, 2022, 10:44:12 PM Hi,
asm Patch is included. Like i said my A4 works great with hack. Maybe i Found the Problem. I will report later when i've tested it Title: Re: 5120 Hack - No Boost - ThrottlePlate is not opening full. Post by: benni4000 on April 25, 2022, 01:37:25 PM CWPLGU set to 1 solves problem.
|