|
Title: 1.8t awt requsted lambda 0.95 on low loads Post by: bandyta928 on May 03, 2022, 10:00:39 AM Hi. I have deleted sai and 2nd lambda. Also zeroed FKHABMN. After acceleration when i lift off gas pedal my requsted lambda goes 0.95. I logged different variables and there is lambda 1, like lamfa bts kr etc. Is it cat heating? Any ideas?
Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: bandyta928 on May 04, 2022, 09:58:22 AM Anyone?
Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: Blazius on May 04, 2022, 10:51:02 AM Look at the FR, what effects req lambda.
Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: fknbrkn on May 04, 2022, 11:20:54 AM Is that irrelevant due to overrun cutoff? ::)
Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: bandyta928 on May 04, 2022, 12:32:22 PM At 65 seconds u can see it in log. Its not actually overrun.
Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: Blazius on May 04, 2022, 12:54:01 PM Is that irrelevant due to overrun cutoff? ::) it would be but we have to believe his word until the log is posted :) Regardless log injector mask cutoff, to see if you are actually injecting or not... else it doesnt really matter req lambda is. Title: Re: 1.8t awt requsted lambda 0.95 on low loads Post by: bandyta928 on May 04, 2022, 01:06:11 PM Actual lambda follows requsted. There is incjection.
|