NefMoto

Technical => Tuning => Topic started by: Dejw0089 on May 16, 2022, 01:09:01 PM



Title: Engine load < engine load requested
Post by: Dejw0089 on May 16, 2022, 01:09:01 PM
Hi.
Can anyone give me a point what can cause low engine load?
And turbo didnt hit boost fast. its k03s turbo so normally boost is on low rpms fast.


Title: Re: Engine load < engine load requested
Post by: nyet on May 16, 2022, 01:19:00 PM
Limp. 10% WGDC

Codes?


Title: Re: Engine load < engine load requested
Post by: Dejw0089 on May 16, 2022, 11:23:44 PM
Limp. 10% WGDC

Codes?
No WGDC is 95% when throttle is 100%


Title: Re: Engine load < engine load requested
Post by: nyet on May 16, 2022, 11:43:41 PM
oops sorry, didn't see it was 9.5E1

yes, you have a huge boost leak or your wastegates are stuck open.

pressure test, check DVs, check n75, try disconnecting wg lines


Title: Re: Engine load < engine load requested
Post by: Dejw0089 on May 16, 2022, 11:46:28 PM
Ok. Thanks  ;D
I make tune from ori file and wierd is that before on (locked) tune car have 1.1bar boost peak but i think someone off some things and make hard settings to reach that target.


Title: Re: Engine load < engine load requested
Post by: Dejw0089 on May 18, 2022, 10:02:32 PM
oops sorry, didn't see it was 9.5E1

yes, you have a huge boost leak or your wastegates are stuck open.

pressure test, check DVs, check n75, try disconnecting wg lines

You have right nyet  ;D Progressive leak with magician connect n75 valve.