NefMoto

Technical => Cluster and Immobilizer => Topic started by: nobug on May 26, 2022, 12:20:29 PM



Title: 07K906032B immo off please
Post by: nobug on May 26, 2022, 12:20:29 PM
New Beetle 2.5 07K906032B with 95160 eeprom  need immo off please


Title: Re: 07K906032B immo off please
Post by: _nameless on May 26, 2022, 05:04:22 PM
New Beetle 2.5 07K906032B with 95160 eeprom  need immo off please
Its the same as any other vag me7 equipped car. Here is your file 


Title: Re: 07K906032B immo off please
Post by: nobug on May 26, 2022, 05:10:49 PM
Its the same as any other vag me7 equipped car. Here is your file 

Thank You !
will give it a try.


Title: Re: 07K906032B immo off please
Post by: nobug on May 28, 2022, 04:05:53 PM
Hey Marty Thank you for the file. It does work, only issue are the rad fans run on high about 15 seconds after starting the engine.
Any idea of what causes this? I tried a couple other ecu's and they all seem to do it after immo off.


Title: Re: 07K906032B immo off please
Post by: _nameless on May 28, 2022, 06:13:58 PM
Probably has a bad front lower coolant temp sensor. When they fail the fan defaults full speed and I've never had that issue before immo offing a ecu. Besides having a bad coolant temp sensor, if the ecu is from the wrong generation it can cause the fans to run too.