NefMoto

Noob Zone => Noob Questions => Topic started by: MirXas on June 09, 2022, 01:03:01 PM



Title: 8N0906018CA strange no start
Post by: MirXas on June 09, 2022, 01:03:01 PM
Hey. Whenever i flash this 240hp file, the car doesnt start. All other 1Mb 150 180 210 225hp files work ok, this one just doesnt. I've checked it and there's no spark. After some cranking I can smell fuel, kind of, although i didnt check for injector pulse. No fault codes, immo disabled properly. Elsa shows no electric/wiring differences between BAM and BFV engines, etka - also nothing important. Live data shows crank rpm and cam phase degrees when cranking. I've had the same problem before with HN flash and DJ eeprom, but got it sorted with HN eeprom and, as i said, all flash files work now except this one.
So.. do I need the corresponding CA eeprom because its magically different, or if there's something obvious i'm missing ?



Title: Re: 8N0906018CA strange no start
Post by: denniss112 on June 10, 2022, 03:59:19 AM
Did you checksum the file?


Title: Re: 8N0906018CA strange no start
Post by: MirXas on June 10, 2022, 06:02:22 AM
Yes, but also no, file checksums are ok.


Title: Re: 8N0906018CA strange no start
Post by: RENOxDECEPTION on June 10, 2022, 03:00:40 PM
No fault codes or no CEL? my 018ch flashed to 018ca had its CEL disabled for some reason but fault codes would still post.


Title: Re: 8N0906018CA strange no start
Post by: BlackT on June 10, 2022, 03:18:40 PM
Files on B6 are connected to eeprom. Maybe is same case with 240 hp TT beacuse it is 2004+year
You need eeprom from that file or mod yours(I dont know what to mod)


Title: Re: 8N0906018CA strange no start
Post by: MirXas on June 11, 2022, 08:56:15 AM
CEL and EPC works, no fault codes.
Just tried BJX eeprom (model year 2005), still no start. What A4 b6 file i should try ? One that i can find of course..


Title: Re: 8N0906018CA strange no start
Post by: BlackT on June 11, 2022, 11:57:14 AM
You need eeprom from 240 hp file