|
Title: ME 7.9.10 Torque demand limited - Mito 155 t-jet Post by: BetePaille on July 04, 2022, 10:54:29 AM Hello guys,
I copied KFMIOP, KFMIRL, MDMAXNMOT, MDMAXNMOB, KFLDBHN, KLMIMAX from Abarth SS180 file but the car don't want to ask for more than 75-76% torque even with throttle at 99.9%. I attached .csv log, mappack, ori and tuned file. KFPED ask 120% max so no limitation there. Did i missed something else ? Thanks Title: Re: ME 7.9.10 Torque demand limited - Mito 155 t-jet Post by: Bahnah on July 06, 2022, 01:48:42 AM If if change KFMIRL and KFMIOP load doesn't go higher than 172 so maybe a load limiter rather a torque% limiter ? I searched the entire mito 135 damos that is easily found online with no success. Can KFMI_UM limit something ?
Title: Re: ME 7.9.10 Torque demand limited - Mito 155 t-jet Post by: Bahnah on July 07, 2022, 10:37:19 AM It is clearly a load limit. I can make KFLDBHN whatever i want it doesn't request more than 172 load. If i tweak kfmiop/kfmirl the torque request in % varies but i never exceed 172 load.
|