NefMoto

Hi. I have a auq 032hn file on my car and the cruise control not work in 5th gear. All from 1 to 4 works.
I read all topics but without any result for me.

The ecu is coded 11500 and the
FRARAWG
0              1               2             3                4              5
0.1221   0.1221   0.1221   0.1221   0.1221   0.1221

And i have 2  CWFGRGA
CWFGRGA_0_A with 0 value
CWFGRGA_1_A with 10 value

I have nvquot stock defined for the car gearbox. And i think iot must get the correct ratio if the file is right coded.

Some advice please.

032HN files (all that i have) are for 6 gearbox. If you have 5 speed gearbox, just set nvquot corecttly. When i had problems with cruise control, always was wrong nvquot. N

032HN is on my skoda octavia 1 with 5 speed gearbox from factory.
nvquot looks like knows 5 and 6 speeds too

So when cruise control stoped working, did you change something? If software and gearbox from factory - problem shouldn't be related to ECU

6th on a 5 gearbox?

It 5 speed gearbox from factory for 4x4 and the donator car was an audi s3 180hp 4x4 and i mount all on my skoda
The ecu and file was a 032hs and it is coded 10710, i can not code it 11510 even if i wrote in ecu file. Maybe i must modify directly the eeprom
All gears from 1 to 4 work with cruise , only 5 didn't works
I tried a file from BAM engine 018h with 6 gear code and the cruise works, but i want to use my file 032hs
I checked the 018h CWFGRGA_0_A is 131 and CWFGRGA_1_A is 131 too and FRARAWG had axis from 1 to 6 not mine 032hs from 0 to 5
I put nvquot from 018h in my file 032hs but....not work
If any ideea please?

You wrote a lot, but still not clear what you changed. You wrote "mount all from s3", so gearbox also from S3? Now you say 032hs, but in older post 032HN.

Is it so hard to write, f.e. "In car was X gearbox, Y ecu file, Now XX gearbox, YY ecu file" ?

032hs is the file, i wrote wrong in first post, excuse me.
Gearbox and engine and all wires, and cruise are all from audi s3 1.8t ajq 4x4. Only the ecu is from my skoda with a 032hs file on it.

ok, so gear ratios doesnt fit to ecu nvquot. Did you changed all nvquot maps? There is 8 maps for 1 gear, so you had to adjust 48 maps.

But why you need to run with your file? Just rewrite eeprom and use S3 sowtfare. I see no point to stay at 032hs file

FGRABED

I read it but nothing there to make the cruise work in 5th gear

Its literally about why is your cruise doesnt work. Read again and diagnose

I tried all things.....sinccerly i think nobody can resolve this problem with crusie control.
I saw many many post and topics on differents websites , and nobody resolve this.
It is strange how my cruise wors with a file for a 6gearbox and my gearbox had only 5 and on my file with 5 gears not work for 5th gear.
It is strange too how  CWFGRGA_0_A is 131 and CWFGRGA_1_A is 131 too and in my file CWFGRGA_0_A with 0 value and CWFGRGA_1_A with 10 value
it is nothing like in FR......no explanations.

There is no problem at all.
All conditions explained at FGRGABED, if you cannot simply read and log 1 variable then its probably not yours. Pay someone for tune

Your cwfgrga defined wrong obviously

Im sure the problem is in nvquot but you did nothing to doagnose it (like those people in tons of topics)
Good luck