|
Title: 2009 Audi TTS log Post by: geira on July 28, 2022, 10:47:42 AM Hi can anybody check if this is a safe tune. I done a log using IE logging tool and to me it looks like Lambda is all over the place. I did not drive long before i did the log. Tuning is from a well known distributor here in Norway. Did send a request to him and the answer he got from his tuner was " the file is correct and is used by alot of cars global " i dont think the tuner even bother to look at my log. Need help to decide if this is safe to drive with or just go back to stock.
https://datazap.me/u/geira/log-1658072650?log=0&data=1 Title: Re: 2009 Audi TTS log Post by: cherry on July 28, 2022, 02:06:28 PM Check requested and actual fuel high pressure, check requested lambda. Also check injection time. Maybe there is a very low lambda request and you just run out of fuel. Or there is some aftermarket intake inside which disturb your maf? Nobody knows from this log...
Title: Re: 2009 Audi TTS log Post by: geira on July 28, 2022, 02:54:12 PM Ok. Thanks. Maybe i should log using vcds instead.
Title: Re: 2009 Audi TTS log Post by: denniss112 on July 28, 2022, 03:36:01 PM Ok. Thanks. Maybe i should log using vcds instead. log with me7logger. Title: Re: 2009 Audi TTS log Post by: cherry on July 28, 2022, 04:00:29 PM It´s MED9. VCDS should be fine for some basic logs. I dont know this IE logger, but it seems there are some mistakes insinde. And if these are all possible values, it´s pretty useless...
Title: Re: 2009 Audi TTS log Post by: geira on July 29, 2022, 01:34:37 AM I have also done a log of stock car using IE logger . It also look funny, but i have never logged an tfsi engine before only 1,8T engine. I think im gonna go back to vcds for logging in the future :). Thanks .
|