|
Title: Cannot find NMAXS or NMAXMD MED17.1.1 8R0907115P Post by: connor123me on August 01, 2022, 12:32:36 PM Basically the title. I have looked and looked, but where my DAMOS has it, it appears to just be completely removed from my file. Have tried comparing it to another file I was able to add LC to (8K2907115D) but its about the same. On my file it appears the section was just removed. The Hex Above and Below match up fine, but the NMAXS area is just gone. If anyone could help it would be greatly appreciated! I have attached my latest tune revision.
Title: Re: Cannot find NMAXS or NMAXMD MED17.1.1 8R0907115P Post by: gremlin on August 02, 2022, 11:52:53 AM the NMAXS area is just gone. If anyone could help it would be greatly appreciated! I have attached my latest tune revision. NMAXS maps area don't exist in this ECU. It use area HLSDem_NMaxEng instead. Title: Re: Cannot find NMAXS or NMAXMD MED17.1.1 8R0907115P Post by: connor123me on August 03, 2022, 11:48:28 AM Gremlin to the rescue again! Thank you so much, I appreciate it tremendously! I take it you have done quite a bit of work with this SW number?[quote
NMAXS maps area don't exist in this ECU. It use area HLSDem_NMaxEng instead. Title: Re: Cannot find NMAXS or NMAXMD MED17.1.1 8R0907115P Post by: gremlin on August 04, 2022, 07:01:02 PM I take it you have done quite a bit of work with this SW number? See at HLSDem_NMaxEng area in your SW (8R0907115P 0002) Title: Re: Cannot find NMAXS or NMAXMD MED17.1.1 8R0907115P Post by: connor123me on August 05, 2022, 08:21:06 AM Thank you a million! The Damos I have that does use HLSDem_NMaxEng has the 1.35 version so I could not get anything to line up right. The picture you posted with version 1.31 the values and maps are all in the correct address, so I have begun defining the maps.
I may be pushing my luck but what are the chances of me getting my hands on that Damos you have... :) |