Print Page - Problem with rev limit on 8E0518AL with 5120 hack

Title: Problem with rev limit on 8E0518AL with 5120 hack
Post by: BlackT on August 11, 2022, 10:45:04 PM

Code:

Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/5/A505U//24I4/24I4AL2/171106/
-> Contents of ECUID data table:
   - '0261208228'         (SSECUHN)         
   - '1037386802'         (SSECUSN)         
   - '8E0909518AL '       (VAG part number) 
   - '0005'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'

File have 5120 hack, car is driving without problems except rev limiter. Even I set all limiters I found at 7300 my throttle plate is closing at 6900 to 50% ( it is not load reduction)
Also there is no hard limit at 7200

Can someone spot what am I missing? Hard limiter is no problem in this case, I can make it with ASM
Curent car is on Alpha-n , I did not sort SD till end yet

Title: Re: Problem with rev limit on 8E0518AL with 5120 hack
Post by: fknbrkn on August 12, 2022, 12:27:04 AM

Tsrldyn always follows tsmax when e_lm active
Duno about tb, could be ps_w issue (wdkugdn and so on)

Title: Re: Problem with rev limit on 8E0518AL with 5120 hack
Post by: gremlin on August 12, 2022, 10:50:20 PM

Quote from: BlackT on August 11, 2022, 10:45:04 PM

Even I set all limiters I found at 7300 my throttle plate is closing at 6900 to 50% ( it is not load reduction)

Check what fra_w, frao_w and rkat_w shows at the moment before throttle will be 50% closed.

Title: Re: Problem with rev limit on 8E0518AL with 5120 hack
Post by: BlackT on August 16, 2022, 07:19:09 AM

Thank you very much, I will report after solving problem

NefMoto

Noob Zone => Noob Questions => Topic started by: BlackT on August 11, 2022, 10:45:04 PM