|
Title: Flashing Cable Question Post by: Gus on September 17, 2022, 09:32:46 AM I built a flashing cable using the info in the getting started post. My question is about the CAN line. I am trying to connect to a 2004 Audi Allroad TIP ECM ME7.1.1 (47Z 907 551 R.) I have been successful connecting to a ME7.5 (4B0 906 018 CM). My flashing cable is not wired for CAN communication. Is that why I cannot connect to the ME7.1.1 ECM?
Title: Re: Flashing Cable Question Post by: Gus on September 17, 2022, 10:20:21 AM Attached screenshot of failure
Title: Re: Flashing Cable Question Post by: Gus on September 19, 2022, 03:19:57 PM Added battery 12V+ to pin 21 and I can see the module now. Off to figure out flashing.
|