|
Title: VAG Bosch MG1 - immo off Post by: golfather on October 07, 2022, 03:43:39 AM Hi all
Can anyone do an immo off (or even clone) on this donor ecu thanks! Title: Re: VAG Bosch MG1CS002 - immo off Post by: prj on October 07, 2022, 03:51:26 AM Yes...
I'll have a de-immo service online next week in my toolbox. Title: Re: VAG Bosch MG1CS002 - immo off Post by: golfather on October 07, 2022, 10:52:52 AM Yes... I'll have a de-immo service online next week in my toolbox. Ok great! Do let me know when its ready as I have a test car and ecu to try it on first. Want to check if any other warnings or errors come up Cheers. Title: Re: VAG Bosch MG1CS002 - immo off Post by: prj on October 07, 2022, 11:30:45 AM No errors show up, no fault codes anywhere.
I've been doing this for a few years. I'm just making an automated tool. Title: Re: VAG Bosch MG1CS002 - immo off Post by: tobygolf66 on October 22, 2022, 02:40:20 AM @Prj is your Online Tool Online already ?? Need Immo off for MG1CS008 if possible ?
Rgds Toby Title: Re: VAG Bosch MG1CS002 - immo off Post by: prj on October 25, 2022, 08:20:42 AM https://tools.vehical.net/VAGMG1Immo (https://tools.vehical.net/VAGMG1Immo)
Should work with most VAG MG1 ECU's. Title: Re: VAG Bosch MG1CS002 - immo off Post by: _nameless on October 25, 2022, 06:53:24 PM I can also do immo off . Not for free
Title: Re: VAG Bosch MG1CS002 - immo off Post by: golfather on November 11, 2022, 10:30:16 AM I can also do immo off . Not for free Can you let me know how to access your service too please MG1CS002 Title: Re: VAG Bosch MG1CS002 - immo off Post by: golfather on November 11, 2022, 10:32:27 AM https://tools.vehical.net/VAGMG1Immo (https://tools.vehical.net/VAGMG1Immo) Should work with most VAG MG1 ECU's. Thanks prj, looks good However can you also process .bins read from other tools, such as Bitbox or AMT BST master Title: Re: VAG Bosch MG1CS002 - immo off Post by: prj on November 11, 2022, 01:03:10 PM At the moment no.
But if you e-mail me on support mail I can tell you what to do with your file so the tool accepts it. I think you can use AMT. |