|
Title: 1.8t AUM ECU to APY Post by: horon6155 on October 11, 2022, 01:49:50 PM Hi community,
I have an AUM ecu that has already been optimized (not in my possession). This one is not good and I need to reset this to original. Unfortunately I don't have the original file. So I thought to myself if I could play the APY file on it? As with the newer models, are there also BDM files for the ME7.5 that I can simply play on it and it works or do I have to play the APY file with the appropriate EEPROM on it? HW: 06A906032HJ 0261207436 I would be grateful for any help Title: Re: 1.8t AUM ECU to APY Post by: dal on October 11, 2022, 03:08:03 PM Hi.
APY uses an narrowband 512kb ecu. Why wanna use it? Title: Re: 1.8t AUM ECU to APY Post by: horon6155 on October 11, 2022, 03:12:06 PM I don't have a camshaft adjuster. A 1.8t ARZ was installed in my Golf 3. With a k04 upgrade charger. The AUM has a camshaft adjuster which I don't have. I'm also not so good at programming it from the ecu. I'll test the k04 upgrade loader anyway and try to optimize it myself.
An ARZ ECU would also be enough for me, where I don't have a camshaft adjuster. Title: Re: 1.8t AUM ECU to APY Post by: dal on October 12, 2022, 09:11:43 AM So tune your ARZ ecu.
APY software isnt compatible with your hardware. Title: Re: 1.8t AUM ECU to APY Post by: horon6155 on October 12, 2022, 02:03:34 PM İ just have apy ecu. My arz ecu got robbed. Can i play the file from the arz ecue to the apy ecu?
Title: Re: 1.8t AUM ECU to APY Post by: dal on October 13, 2022, 04:29:20 AM See for your self. Compare engine hardware from both ECU's cars, compare the filesize of the flash.
Title: Re: 1.8t AUM ECU to APY Post by: fknbrkn on October 13, 2022, 06:10:43 AM Should be crossflashable but im not sure
Dhare a story of ecu robbers ::) Title: Re: 1.8t AUM ECU to APY Post by: BlackT on October 13, 2022, 06:34:58 AM APY is 512 kb, ARZ is 512 kb
APY dont have ECM relay ARZ does(maybe) Both have two lambda probes Title: Re: 1.8t AUM ECU to APY Post by: horon6155 on October 15, 2022, 08:00:56 AM i have a aum ecu. my question is: can i change the aum file with my original arz file? can i change that or do i have to change the eeprom to make it work or is there a bdm for the me7.5 control units?
Title: Re: 1.8t AUM ECU to APY Post by: adam- on October 15, 2022, 01:29:57 PM No, they are different file sizes.
|