NefMoto

Hi

So anyone know what’s the difference between the stock throttle body and the one you can get with build-in cruise (also OEM)

They look the same (only seen pictures) - does it use the idle motor for cruise?

And would I be able to find one from a VR6 or same also with cabel and cruise?

Currently have a aftermarket box build to the gas pedal for cruise which have failed, so would like to remove it and go the OEM way
-But could I mod the original? Or if I need to buy, is there a bigger option?

This is the TBI
https://crestana.com.br/corpo-borboleta-tbi-motor-vw-e-audi-18-turbo-20v-150cv-agu-06a133063f-golf-a3___cp73785?f=1&cm=0&cv=0&ano=0&nsn=06a133063f

I can also order one at VW, but that was not the question :D

You asked if they look the same, I provided you a link to see by yourself that it is not the same.
I have retrofited an AGU with oem cruise control. Just look on wiring diagrams and you will see the electrical differences.

No I said they looked the same :D which they don’t (Donno what pictures I have looked at)
-but the only difference is the round hole beside the connector? Is that the thing that will lock it for cruise?

I could not find any difference in the connector? Both have 8pin plug, with 7 wires


But I just found the SSP 195 2.3 v5 engine, it’s explained inside, the gear inside is bigger(:
-more info should be found in the SSP 173 (but didn’t look into that)

So for the final question

Can we get one from a VR6 or Audi that is bigger with cruise?