NefMoto

Microsoft Windows [version 6.3.9600]
(c) 2013 Microsoft Corporation. Tous droits réservés.

C:\Users\JM>C:\Users\JM\Documents\me7sum.exe 4B0906018R.bin
ME7Sum (v1.1.2) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file '4B0906018R.bin'
Ý Opening '4B0906018R.bin'

Can't open '4B0906018R.bin'.
Failed to open firmware file '4B0906018R.bin'

C:\Users\JM>

The bin is not in c:\users\JM

Where did you put it?

I tried me7sum in documents with a bin file, I tried me7sum installation in c: with a bin it doesn't work either. But me7 correction yes.
I would like to try me7romtool but I can't. usage:me7romtool.exe <options>...??

Please learn how dos command line works, along with directories. Helping you with these basics are beyond the scope of this forum, especially if you refuse to post output of what you've tried (including directory contents of your CWD).

What?


It's telling you what arguments it expects you to type.

yes, I have a lot to learn about cmd dos, nefmoto and computer.
I am an industrial mechanic

I tried me7.x Correction it's ok
me7x Correction make me7chek and me7sum ??yes?

me7check v1.12 (c) mki, 06/2004-05/2012
Checking file E:\BIN ORIGINE\A4B5AWT.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst03o/300500//
-> Contents of ECUID data table:
   - '0261206539'         (SSECUHN)         
   - '1037354801'         (SSECUSN)         
   - '4B0906018R  '       (VAG part number)
   - '0003'               (VAG sw number)   
   - '1.8L R4/5VT     '   (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           

-> No errors found. File is OK.   *********************

I dont see any output from me7sum here

Microsoft Windows [version 6.3.9600]
(c) 2013 Microsoft Corporation. Tous droits réservés.

C:\Users\JM>C:\Users\JM\Documents\me7sum.exe A4B5AWT.bin
ME7Sum (v1.1.2) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'A4B5AWT.bin'
Ý Opening 'A4B5AWT.bin'

Can't open 'A4B5AWT.bin'.
Failed to open firmware file 'A4B5AWT.bin'

C:\Users\JM>

ok i understand me7x correction it's just me7Check for a noob no cmd just click check. :-\ ::)

but i still can't get me7sum to work :-\

Why have you not shown the output of "dir"


C:\Users\JM> is your CWD. Where is your bin file?

Again this has nothing to do with Me7sum. You are just randomly typing things now.

sorry i don't know how to use it

I was only asking CMD usage to use

with google translate it's not easy...

my original bin is here

Move your bin into the folder where ME7sum is.

Open CMD. 
Type "cd c:\users....\me7sum".  Adjust to suit actual directory.  CD is change directory.
Type me7sum "A4B5AWT.bin" "A4B5AWT_out.bin"

thank you adam

Although the above are moaning that you should know DOS inside out, it's an old system that no-one uses and takes a bit of getting use to.  It takes less time for me to type how to do it AND HELP rather than making you chase your tail.

Disagree.

The help vampire is are real thing. In any case, if you do choose to spoon feed, you should be explicit about WHY your solution works, and not just hand them a solution they should follow verbatim.

You did not do so in your help, and if the person asking clearly has no interest in learning WHY, that is never a good thing. There is nothing as toxic as a taker who shows zero curiosity, except for those who enable them.

I'm not here to suck up information! especially if it's not to understand it. yes I'm not a computer scientist. but I am able to completely disassemble and reassemble my 1.8t. I'm here to learn me 7.5 because I love it my 1.8t. and i like to smoke hdi in the morning on my way to work. it's a hooby i'm not looking to make a job out of it. ms dos ... and other virtual commands don't interest me indeed . I want to learn how to recognize the maps and their modifications for fun and drive an e85 because I am not a computer scientist. In short, thank you for those who want to help me

and sorri for my english :P

Noob is toxic here? If so, why have a noob section? For professional Noob?
then delete my profile...if I'm too dumb ... just say so ... it will save me google transssss

No, not you apologies, just responding to adam.

Love being toxic. :)

it's ok, i test my original bin ;D

C:\Users\JM\Documents>Me7sum\me7sum A4B5AWT.bin A4B5AWT out.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: Me7sum\me7sum [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
       Me7sum\me7sum [-v] [-i <config.ini>] -s <inrom.bin>

C:\Users\JM\Documents>me7sum inA4B5AWT.bin outA4B5AWT.bin
'me7sum' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.

C:\Users\JM\Documents>cd Me7sum\me7sum
Le chemin d'accès spécifié est introuvable.

C:\Users\JM\Documents>Me7Sum\me7sum A4B5AWT.bin A4B5AWT_out.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'A4B5AWT.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4016.31//24b/Dst03o/300500//'
 Part Number : '4B0906018R  '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0003'
 HW Number   : '0261206539'
 SW Number   : '1037354801'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x008FA5 CalcAdd=0x008FA5  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xA582BF CalcAdd=0xA582BF  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01bf54 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183B4-0x0183BD                      CalcCRC: 1C8A2102
 1) 0x010002-0x013FFE @8e1f6 CRC: 17EAE51A CalcCRC: 17EAE51A(r) CRC OK
 2) 0x014252-0x017F4E @8e1fc CRC: 248387D0 CalcCRC: 248387D0(r) CRC OK
 3) 0x018192-0x01FBDC                      CalcCRC: 566AA952(r)
 4) 0x026A00-0x02FFFC @8e202 CRC: 463FD3F9 CalcCRC: 463FD3F9(r) CRC OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1fb76 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D2609B
    0x00FC00-0x01FFFF CalcChk: 20070A91 CalcCRC: E5F7575A SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 4CEF77FA CalcChk: 4CEF77FA OK (i)

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in A4B5AWT.bin

*** DONE! 0/0 error(s) in A4B5AWT.bin corrected in A4B5AWT_out.bin! ***

C:\Users\JM\Documents>


cmd is not toxic :o :D ;) :-X

You have a very outdated version of me7sum

:/ thank you where is the last version? in my files I is only v1.0.3

I just saw that you are the big boss nyet  ::)? you made me7sum.... no? I see nyet writing everywhere. sorry to take your time. I better understand your answer on my post and the use of cmd ....as a noob there is so much to learn and read on this site that we are happy to have a little help and verification. indeed we must also take the time to learning the basics. mechanics seems easier to me but it's the same without the basics we don't understand anything.
thank you very much for your work

ok for me last version v1.1.2 ;D