|
Title: ESKONF??(for noob) Post by: JeanAwt on November 03, 2022, 12:20:00 PM hey,
when you modify Eskonf you modified all the lines eskonf? I have 3 eskonf 0 ,1 ,2? I modified eskonf1 above KFKHFM I have to modify everything 0.1.2? thank Title: Re: ESKONF??(for noob) Post by: MirXas on November 03, 2022, 01:37:11 PM ESKONF has 7 bytes in me7. First three AA FF 00 are left unchanged. You edit the byte that you need, not all bytes. What do you want to do ?
EDIT: yes, 7 bytes - not 6. Have a laugh :) Title: Re: ESKONF??(for noob) Post by: Geomeo on November 03, 2022, 04:26:03 PM ESKONF has 6 bytes in me7. First three AA FF 00 are left unchanged. You edit the byte that you need, not all bytes. What do you want to do ? 0 to 6 = 7 bytes. ;DTitle: Re: ESKONF??(for noob) Post by: _nameless on November 03, 2022, 05:33:13 PM hey, You have more then 1 eskonf because the file you have has variant coding for manual, auto , cvt etc. If you are not sure what one to modify then do them all, its easy and makes it so you wont have to make several edits to find the active map. when you modify Eskonf you modified all the lines eskonf? I have 3 eskonf 0 ,1 ,2? I modified eskonf1 above KFKHFM I have to modify everything 0.1.2? thank Title: Re: ESKONF??(for noob) Post by: JeanAwt on November 03, 2022, 10:39:20 PM thank you
changing ESKONF is easy yes. it's just that I didn't understand why there were 3. so it's for the different manual auto versions.... I removed SAI slv slp because I have a DTC which comes back the same morning with a resistor in place of the pump. heating. need to remove the rear o2 sensor too? |