|
Title: 2008 City Golf - need help finding pin/skc Post by: tomslik on November 26, 2022, 09:32:50 PM Im trying on a City Golf to program some keys, all keys lost and I am having trouble pulling the PIN/SKC from either the ecu or the cluster.
Im using VAG K+CAN commander V3.0 and the intruments say cant access, something to do with the security key? And the ecu comes up with 0002 as the SKC but i cannot login with that with VCDS and it says session dropped and dash says FAIL. Its supposedly a ME7.1.1 part number 06A906012P / 06A906032RF or 06A 906 012 P 06A 906 032 RF BIN attached Title: Re: 2008 City Golf - need help finding pin/skc Post by: _nameless on November 26, 2022, 11:39:51 PM EEPROM is corrupt you need to use the right protocol, should be 95p08 or 95160.
Title: Re: 2008 City Golf - need help finding pin/skc Post by: _nameless on November 26, 2022, 11:46:23 PM However, even though the eeprom is corrupt the login should be (0)1504
Title: Re: 2008 City Golf - need help finding pin/skc Post by: elektronik13 on November 27, 2022, 09:11:26 AM However, even though the eeprom is corrupt the login should be (0)1504 I confirm, pin is 01504at the moment, this ecu has immo off done for posterity, this eeprom reading is not usable as a backup for saying what should have been said about this eprom, I was rated negative so if this Person Can Kill Anything, I wonder if he can build something himself because I'm redundant here greetings to all Title: Re: 2008 City Golf - need help finding pin/skc Post by: tomslik on November 27, 2022, 06:40:23 PM I confirm, pin is 01504 Hey thanks for confirming the pin, I will try that out.at the moment, this ecu has immo off done for posterity, this eeprom reading is not usable as a backup for saying what should have been said about this eprom, I was rated negative so if this Person Can Kill Anything, I wonder if he can build something himself because I'm redundant here greetings to all And I will try to look in the bin for the PIN. Where was it in this corrupt bin and where should it be? Thanks all. Title: Re: 2008 City Golf - need help finding pin/skc Post by: _nameless on December 03, 2022, 05:36:36 AM Hey thanks for confirming the pin, I will try that out. Pin code is located at a specific address same for all me7 vag ecus. Your eeprom is corrupt meaning the read was bad. Most of the bits are still there but wrong addresses and that's why I was able to still tell you the log in. However, the eeprom being corrupted makes the read worthless And I will try to look in the bin for the PIN. Where was it in this corrupt bin and where should it be? Thanks all. Title: Re: 2008 City Golf - need help finding pin/skc Post by: blairdude on December 31, 2022, 02:47:34 PM Just FYI, kw1281test should support reading/writing the cluster EEPROM on these rather obscure clusters (they're mostly the same as Mk4 clusters with some minor differences). I don't think any other tools support the clusters in these.
Title: Re: 2008 City Golf - need help finding pin/skc Post by: _nameless on January 01, 2023, 04:19:31 AM Just FYI, kw1281test should support reading/writing the cluster EEPROM on these rather obscure clusters (they're mostly the same as Mk4 clusters with some minor differences). I don't think any other tools support the clusters in these. Helps if you read the thread... It has nothing to do with the cluster eeprom this is from the ecu... :DTitle: Re: 2008 City Golf - need help finding pin/skc Post by: stuydub on January 01, 2023, 09:01:38 AM If it is IMMO OFF the pin is no good as you cant adapt a IMMO OFF ecu to car... ecu cluster and keys all need to be adapted together...
Title: Re: 2008 City Golf - need help finding pin/skc Post by: blairdude on January 01, 2023, 04:44:24 PM Helps if you read the thread... It has nothing to do with the cluster eeprom this is from the ecu... :D Quote from the original post, "having trouble pulling the PIN/SKC from either the ecu or the cluster". I provided a way to pull the SKC from the cluster. |