NefMoto

Noob Zone => Noob Questions => Topic started by: iras24 on November 30, 2022, 11:02:40 AM



Title: Volvo 2006 xc90 2.5T P0602
Post by: iras24 on November 30, 2022, 11:02:40 AM
Hello .I have a problem with P0602 after uploading a new file (tuned) to ME7.0 Volvo XC90 2.5T 2006. The engine starts, but after driving a few kilometers the ECU generates the P602 error. At first I thought it was the checksums fault. I'm thinking of excluding this error from the error table but I can't find it. If anyone can help I would be very grateful. Perhaps there is a better solution than removing the error from the table. Regards.


Title: Re: Volvo 2006 xc90 2.5T P0602
Post by: adam- on November 30, 2022, 12:56:07 PM
Post file, checksum output.  P602 is not a code.


Title: Re: Volvo 2006 xc90 2.5T P0602
Post by: iras24 on November 30, 2022, 02:43:28 PM
Hello .I have a problem with P0602 after uploading a new file (tuned) to ME7.0 Volvo XC90 2.5T 2006. The engine starts, but after driving a few kilometers the ECU generates the P0602 error. At first I thought it was the checksums fault. I'm thinking of excluding this error from the error table but I can't find it. If anyone can help I would be very grateful. Perhaps there is a better solution than removing the error from the table. Regards.


Title: Re: Volvo 2006 xc90 2.5T P0602
Post by: iras24 on November 30, 2022, 02:45:50 PM
Post file, checksum output.  P602 is not a code.


Title: Re: Volvo 2006 xc90 2.5T P0602
Post by: iras24 on November 30, 2022, 02:48:29 PM
P0602 Control Module Programming Error