|
Title: LC Flames 1.8T Post by: xXxCryxXx on December 01, 2022, 03:36:10 AM Hello @all
I have a question, can someone tell me where i can set the ignition for Launch Controll ? I want to add big flames to the exhaust while LC is activ. i used the Launchcontrol script and added to winols the variables and offsets so i got the maps for setting up pedal and so on. I would be happy if someone can help me or say the trick or do i need Overrun Fueling?. FTMON is set to 0, ignition cut is set to 100ms Pedal position to 90%. i search for that but maybe i do some wrong search on the Forum. Thank you if you can help me :) Title: Re: LC Flames 1.8T Post by: BlackT on December 01, 2022, 06:54:16 AM Set whole KFZW map to -15°
Title: Re: LC Flames 1.8T Post by: xXxCryxXx on December 01, 2022, 08:07:02 AM Set whole KFZW map to -15° Thanks i will try :) i forget to look what load the cars has on LC :) thank you Title: Re: LC Flames 1.8T Post by: _nameless on December 01, 2022, 08:59:28 AM That is extremely stupid do not set the whole table to -15, that will be a good way to put a rod threw the block
Title: Re: LC Flames 1.8T Post by: prj on December 01, 2022, 10:11:28 AM That is extremely stupid do not set the whole table to -15, that will be a good way to put a rod threw the block Nah, it won't, but lulz will be had.Title: Re: LC Flames 1.8T Post by: yolonaise93 on December 02, 2022, 01:53:19 AM That is extremely stupid do not set the whole table to -15, that will be a good way to put a rod threw the block No i wont do that only in the range... so i will try step by step upwords :) but not the whole tabel Title: Re: LC Flames 1.8T Post by: xXxCryxXx on December 02, 2022, 03:25:09 AM No i wont do that only in the range... so i will try step by step upwords :) but not the whole tabel thats what i was thinking step by step and not maxed out Title: Re: LC Flames 1.8T Post by: fknbrkn on December 02, 2022, 10:18:36 AM Flames starting at -60 deg
|