|
Title: Om612 standalone Post by: fineku on December 10, 2022, 01:27:06 PM Hi! I am installing an om612 engine with an edc15c6 ecu in a boat. Which wires must be connected to the ecu in addition to the engine wiring harness to make the machine work? The immobilizer should obviously be turned off and the gearbox information changed to manual in the ecu. How to do this? Thank you.
Title: Re: Om612 standalone Post by: prj on December 10, 2022, 02:55:40 PM You should probably solve the issue of "how will it start" before you start "installing engine".
Because else maybe you will have to uninstall it again. Anyway, for EDC15C6 this should work and probably cheapest solution: https://shop.carlabimmo.com/en_US/p/Julie-MERCEDES-IMMO-OFF-Emulator/157 (https://shop.carlabimmo.com/en_US/p/Julie-MERCEDES-IMMO-OFF-Emulator/157) Recommend to solder it properly, so it does not fall off in the middle of the sea. But also just the immo is not the only thing, you also need to convert the pedal to the hand throttle, and a lot of stuff will need to be deleted/modified. Why not just use a marine engine in the first place? |