|
Title: Trouble reading flash file me 7.5 Post by: Andy.G on December 24, 2022, 11:50:25 PM Hi! Have been trying to immo off my me 7.5 from an apu engine. I think I have succeeded (can’t try it in the car since the engine swap isn’t done) with the immo off.
Now I’m trying to download the flash file but I’m doing something wrong.. I can read the file with galletto in boot mode but getting checksum errors. ============================================================================== ME7Check v1.08 (c) mki, 06/2004-04/2011 Checking file C:\Users\Hemmadator\Desktop\Me7\me7test2 (size=1048576) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 40/1/ME7.5/5/4017.00//PST_SER/DST_SER2// -> Contents of ECUID data table: - '0261206050' (SSECUHN) - '1037350229' (SSECUSN) - '4B0906018B ' (VAG part number) - '0004' (VAG sw number) - '1.8L R4 5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> NO calls of update_data_checksum within calc_data_checksum found page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0xFFFFFFFF page checksums: invalid start address 0x0082FA page checksums: invalid start address 0x3F3482FA -> Found 35 errors!!! ******************************* Have tried using the kkl cable and nefmoto software but it doesn’t work, something like ”memory flash failed” comes up and security access was rejected.. Can I use the flash file from galletto and do a checksum correction or is it wrong? Thankful for help Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 12:06:32 AM Why on earth would you
1) use me7check but not me7sum 2) take a picture of your screen with a fucking potato phone instead of just getting a screen shot 3) upload it to google instead of embedding it in post 4) not bother to *just copy/paste the text directly*? 5) entirely omit the binary You're wasting everyone's time. anyway, its probably on a riser. Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 12:25:43 AM I don’t have access to the computer right now, I’m sorry for wasting your time..
I will fix a screen shot instead. My question was if it’s safe to use the file if me7sum corrects the file? Sorry again for doing it wrong. Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 12:55:26 AM I don't think that file is stock, and/or you have a riser in the ECU, or its not supported by me7check (which i never use).
ME7Sum should not find any errors in your file. Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 01:00:46 AM http://nefariousmotorsports.com/forum/index.php?topic=19796.0title=
Code: ME7Sum (v1.1.2-3-gd374-dirty) [Management tool for Bosch ME7.x firmwares] Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 01:06:49 AM Thank you very much! Will try me7sum instead.
Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 01:09:23 AM Thank you very much! Will try me7sum instead. Not sure it matters much. I dont know that reading your current file successfully will get you anywhere. Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 01:15:31 AM Code: ============================================================================== Note that this is a 512k file, not 1M Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 02:14:59 AM Okey thanks! Will use the generic one instead.
Just wonder if I have done something wrong.. could my eeprom fiddling (immo off) make the flash file go wrong? Title: Re: Trouble reading flash file me 7.5 Post by: JeanAwt on December 25, 2022, 06:05:11 AM what is the purpose ?swap engine?
immo off why? Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 06:59:26 AM Yes, I’m doing a 1.8t in my Porsche 944, hence the immo off :)
Title: Re: Trouble reading flash file me 7.5 Post by: JeanAwt on December 25, 2022, 07:31:08 AM cool 944, to make a racing car? :o 8)
Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 08:40:08 AM Maybe a track day car, but most for Sunday driving. A valve blew on the original motor so I wanted a better engine with more horsepower potential ;D
Title: Re: Trouble reading flash file me 7.5 Post by: nyet on December 25, 2022, 01:32:25 PM Maybe a track day car, but most for Sunday driving. A valve blew on the original motor so I wanted a better engine with more horsepower potential ;D 2.7t :P Title: Re: Trouble reading flash file me 7.5 Post by: Andy.G on December 25, 2022, 02:14:17 PM 2.7t :P Hehe, too big unfortunately :D Thanks for allt the help, merry christmas! :) |